HP X140 JG325A HP X132 10G SFP+ LC LRM Ports, Transceiver J9152A Connectivity Connector type

QuickSpecs

HP SFP+ Transceivers (SR, LRM, LR and ER)

Technical Specifications

HP X132 10G SFP+ LC LRM Ports		1 LC 10-GbE port (IEEE 802.3aq Type 10Gbase-LRM); Duplex: full only
Transceiver (J9152A)	Connectivity	Connector type	LC

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LRM standard, for 10- Gigabit connectivity up to 220 m on legacy multimode fiber.

	Wavelength	1310 nm
Physical characteristics	Dimensions	2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19
		cm)
	Weight	0.04 lb. (.02 kg)
	Transceiver form factor	SFP+
Environment	Operating temperature	32°F to 158°F (0°C to 70°C)
	Operating relative	0% to 85%, noncondensing
	humidity

	Nonoperating/Storage	-40°F to 185°F (-40°C to 85°C)
	temperature
	Altitude	up to 10,000 ft. (3 km)
Electrical characteristics	Power consumption	0.7 W
	typical
	Power consumption	1 W
	maximum
Cabling	Cable type:
	62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal
	content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2
	Type A1b or A1a, respectively (a mode conditioning patch cord may be needed
	in some multimode fiber installations);
	Maximum distance:
	0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
	0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
	0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
	0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
	0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km
	Cable length	0.5m to 220m
	Fiber type	Multi Mode
Notes	For OM3 cable (50 µm multimode @ 1500/500 MHz*km), a mode-conditioning
	patch cord is not required. Other multimode cables may require mode-
	conditioning patch cords to achieve the maximum distances listed above.
	For fiber patch cords, use Ultra Physical Contact (UPC) surface
	termination/polish. Angled Physical Contact (APC) is not recommended.
Services	Refer to the HP website at: www.hp.com/networking/services for details on
	the service-level descriptions and product numbers. For details about services
	and response times in your area, please contact your local HP sales office.

DA - 13285 Worldwide — Version 3 — September 5, 2012 Page 4