HP X140 JG325A manual HP X132 10G SFP+ LC LR Ports, Transceiver J9151A Connectivity Connector type

QuickSpecs

HP SFP+ Transceivers (SR, LRM, LR and ER)

Technical Specifications

HP X132 10G SFP+ LC LR Ports		1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR); Duplex: full only
Transceiver (J9151A)	Connectivity	Connector type	LC

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit LR standard, providing 10- Gigabit connectivity up to 10 km on single-mode fiber.

	Wavelength	1310 nm
Physical characteristics	Dimensions	2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19
		cm)
	Weight	0.04 lb. (.02 kg)
	Transceiver form factor	SFP+
Environment	Operating temperature	32°F to 158°F (0°C to 70°C)
	Operating relative	0% to 85%, noncondensing
	humidity

	Nonoperating/Storage	-40°F to 185°F (-40°C to 85°C)
	temperature
	Altitude	up to 10,000 ft. (3 km)
Electrical characteristics	Power consumption	0.9 W
	typical
	Power consumption	1 W
	maximum
Cabling	Cable type:
	Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and
	ISO/IEC 793-2 Type B1;
	Maximum distance:
	2m-10km with 9/125 µm single-mode cable
	Cable length	2m to 10km
	Fiber type	Single Mode
Notes	Conditioning patch cord cables are not supported.
	For fiber patch cords, use Ultra Physical Contact (UPC) surface
	termination/polish. Angled Physical Contact (APC) is not recommended.
Services	Refer to the HP website at: www.hp.com/networking/services for details on
	the service-level descriptions and product numbers. For details about services
	and response times in your area, please contact your local HP sales office.

DA - 13285 Worldwide — Version 3 — September 5, 2012 Page 3