HP 5200zl, 3500yl manual Eps

Page 59

LED	State	Indication
	Blinking	If DIMM, Fault, and Self Test LEDs are blinking, DIMM failed
	(orange)	self-test.
		If DIMM and Fault LEDs are blinking, an operational fault has
		occurred.
		If blinking at a fast rate, an operational alert occurred and is
		unresolved.

Flash	On (green)	Flash Card status is known and fault free.

	Off	Flash Card status is unknown.

	Blinking	If Flash, Fault, and Self Test LEDs are blinking, Flash Card failed
	(orange)	self-test.
		If Flash and Fault LEDs are blinking, an operational fault has
		occurred.
		If blinking at a fast rate, an operational alert occurred and is
		unresolved. For example, Flash Card is not present.

Mgmt	On (green)	A Management module is present and fault free.

	Off	The switch is powered off.

	Blinking	There is a fault on the Management module.
	(orange)

	LED	State	Indication
	PoE	On (green)	If any PoE modules are installed.

		Off	If no PoE modules are installed.

		Blinking	Internal PoE fault, external load fault, or denied PoE power.
		(orange)

	Temp	On	Internal temperature is normal.

		Blinking	An over temperature condition has been detected.
		(orange)

	Fan	On (green)	Normal operation.

		Blinking	One or more of the switch’s fans have failed. The switch Fault LED
		(orange)	will be blinking simultaneously.

	Internal Power	On (green)	A power supply is installed in the position in the back of the switch
	(numbers		corresponding to the number, and the supply is plugged in to an
	corresponding to		active AC power source. As shipped, the switch has a single power
	the power supply		supply in position 1.
	positions)
	positions)	Off	A power supply is not installed in the position corresponding to the
		Off
			number.

		Blinking	The power supply installed in the position corresponding to the
		(orange)	number is not plugged in to an active AC power source, or has
			experienced a fault. The switch Fault LED will be blinking
			simultaneously.

	EPS	On (green)	An external power supply is connected.

		Off	An external power supply is not connected.

		Blinking	The external power supply has a fault, or is connected but not
		(orange)	plugged into AC power.

59

Image 59

Contents HP ProCurve Switch 5400zl, 3500yl, and 6200yl Series Ospf Page Introduction Executive summaryOverview Product positioningProVision Asic architecture HP ProCurve Switch 5400zl and 3500yl SeriesHP ProCurve Switch 6200yl-24G-mGBIC Classification and lookup Inside the ProVision Asic ArchitecturePolicy Enforcement Engine Advanced capabilities of the product family Management subsystemHP ProCurve Switch 5400zl Series 5400zl chassis layout ProCurve Switch 5400zl ChassisHP ProCurve Switch 5406zl chassis layout Power supply types System PoE power Power suppliesFan tray Management module Zl modulesHP ProCurve Switch 5400zl series line interface modules Power supply configurations5406zl 5412zl Specifications Auxiliary port ProcessorMemory Console portMini-GBICs supported ordered separately DescriptionPorts Open mini-GBIC slots Maximum distance Transceivers supported ordered separatelyHP ProCurve Radio Ports supported ordered separately HP ProCurve ONE Services zl Module J9289A DescriptionHP ProCurve Switch 3500yl Series Page Additional line interface module LED status indicatorsHP ProCurve Switch 6200yl HP ProCurve Switch 6200yl-24G-mGBIC J8992A Performance Overview of features and benefitsSecurity features Advanced classifier-based QoS Bandwidth shaping usingQoS functions ConvergenceIPv6 Layer 2 switchingBridging protocols Routing protocolsLow cost of ownership DiagnosticsManagement Future-proofingIP Multicast Standards and protocolsDevice management General protocolsNetwork management MIBsSecurity Capacity and performance features comparisonPerformance and capacity QoS/CosPer-port buffer sizes Optimizing the 10-GbE port configuration Page Throughput and latency performance data Gbps Gigabit performance traffic patterns Industry-leading warranty HP ProCurve warranty and supportIntelligent Edge and Premium License Appendix a Premium LicenseTask Manual Using Appendix B Policy Enforcement Engine Hardware-based performance Wire-speed performance for ACLsPolicy Enforcement Engine benefits Granular policy enforcementPoE device types Appendix C Power over EthernetPoE negotiation Power delivery optionsAdditional PoE power-external supplies Support for pre-802.3af standard powered devices Appendix D PIM Sparse ModeAppendix E LLDP-MED Appendix F Virus Throttle security Page Connection-rate ACL Appendix G VrrpResponse options SensitivityXrrp support on 5300xl switch Appendix H Ospf Equal Cost Multipath Vlan ID Appendix I Advanced Classifier-Based QoSLimitations/Restrictions Appendix J Server-to-Switch Distributed TrunkingAn example of upstream traffic forwarding is as follows Appendix K TroubleshootingLED status indicators for 5400zl series EPS LED LED status indicators for 3500yl and 6200yl series Temp On green Blinking orange Fan Status PoE Status Off Part number Component Part numbers and Field Replaceable UnitsPart number Component For more information