HP GbE2c manual SNMPv3 Community Table configuration, Usmsnmpv1snmpv2 Uname

Page 101

The following table describes the SNMPv3 Group Configuration Menu options.

Table 89 SNMPv3 Group Configuration Menu options

Command

Description

 

 

model

Defines the security model.

usmsnmpv1snmpv2

 

 

 

uname <1-32

Sets the user name as defined in /cfg/sys/ssnmp/snmpv3/usm/name. The user

characters>

name can have a maximum of 32 characters.

 

 

gname <1-32

Configures the name for the access group as defined in

characters>

/cfg/sys/ssnmp/snmpv3/access/name. The group name can have a maximum

 

of 32 characters.

 

 

del

Deletes the vacmSecurityToGroup entry.

 

 

cur

Displays the current vacmSecurityToGroup configuration.

 

 

SNMPv3 Community Table configuration

Command: /cfg/sys/ssnmp/snmpv3/comm

[SNMPv3 snmpCommunityTable 1

Menu]

index

- Set community

index

name

- Set community

string

uname

- Set USM user name

tag

- Set community

tag

del

- Delete communityTable entry

cur

- Display current communityTable configuration

 

 

 

This command is used for configuring the community table entry. The configured entry is stored in the community table list in the SNMP engine. This table is used to configure community strings in the Local Configuration Datastore (LCD) of SNMP engine.

The following table describes the SNMPv3 Community Table Configuration Menu options.

Table 90 SNMPv3 Community Table Configuration Menu options

Command

Description

 

 

index <1-32

Configures the unique index value of a row in this table. The index can have a maximum of

characters>

32 characters.

 

 

name <1-32

Defines the name as defined in /cfg/sys/ssnmp/snmpv3/usm/name. The name

characters>

can have a maximum of 32 characters.

 

 

uname <1-32

Defines a readable 32 character string that represents the corresponding value of an SNMP

characters>

community name in a security model.

 

 

tag <1-255

Configures a tag of up to 255 characters maximum. This tag specifies a set of transport

characters>

endpoints to which a command responder application sends an SNMP trap.

 

 

del

Deletes the community table entry.

 

 

cur

Displays the community table configuration.

 

 

Configuration Menu 101

Page 100 Page 102
Image 101
Page 100 Page 102
Contents HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Page Contents Statistics Menu Configuration Menu 111 Index Command line interface Introduction Connecting to the switchAdditional references Establishing a console connectionTelnet GbE2c Ethernet Blade Switch IP address Setting an IP addressEstablishing a Telnet connection Establishing an SSH connection# ssh user@GbE2c Ethernet Blade Switch IP address Accessing the switchIdle timeout AaBbCc123 Typographical conventionsMenu summary Main MenuTraceroute host name IP address max-hops msec Global commandsDelay Telnet hostname IP address port Command line history and editingCommand stacking Command line interface shortcutsCommand abbreviation Tab completion# /cfg/sys/access/snmp disableread onlyread/write Configuring Simple Network Management Protocol supportMain# /cfg # /cfg/sys/ssnmp/rcommwcommSystem# apply System# save Setting passwordsChanging the default administrator password Changing the default user password Changing the default operator password Menu overview Information MenuSNMPv3 Information Menu System Information MenuHMACMD5, DES Privacy SNMPv3 USM User Table informationHMACSHA, DES Privacy No AUTH, no PrivacySNMPv3 View Table information SNMPv3 Access Table informationPrefix SNMPv3 Group Table informationSNMPv3 Community Table information SNMPv3 Target Parameters Table information SNMPv3 Target Address Table informationSec Level Command /info/sys/snmpv3/notify NameTag V1v2trapv1v2trapSNMPv3 Notify Table information SNMPv3 dump System information System user information Show last 100 syslog messages8021x Stp Cfg/sys/access/user/uid commandLayer 2 information Port port number FDB information menuFind MAC address Vlan Show all FDB information Link Aggregation Control Protocol informationVlan TRKLacp dump 802.1x information Authenticator PAE State Port Auth Mode Auth StatusCommand /info/l2/stp Spanning Tree informationPath-Cost Current RootPriority bridge HelloP2P Rapid Spanning Tree and Multiple Spanning Tree informationDSB Disc FWD Disabled DSB DSB Common Internal Spanning Tree informationDiscarding Disc , Learning LRN , Forwarding FWD , or Disabled DSBTrunk group information Layer 3 information Vlan informationLayer 2 general information Find IP address Route informationGw IP address If IP addressShow all IP Route information Show all ARP entry information ARP informationARP VlanDbase Sumaddr Nsumadd Routes Dump Ospf informationNbr nbr router-id A.B.C.D Ospf interface information Ospf general informationOspf Database information menu AsbrAsbrsum adv-rtr A.B.C.D Linkstateid A.B.C.Dself Advrtr router-id A.B.C.DExt adv-rtr A.B.C.D linkstateid A.B.C.Dself Nw adv-rtr A.B.C.D linkstateid A.B.C.DselfRouting Information Protocol information Ospf route codes informationRIP Routes information RIPIgmp multicast group information RIP user configurationIP information Vrrp information Command /info/l3/vrrp Vrrp informationIgmp multicast router port information 802.1p information QoS informationQoS Menu 8021p Show QOS 802.1p information 8021pVID ACL informationRmon Information Menu Interval Rmon history informationIfoid Command /info/rmon/event Rmon alarm informationRmon event information OIDLink status information Port information Command /info/port Port Tag Rmon PvidName VLANsLogical Port to GEA Port mapping DisabledUplink Failure Detection information STGInformation dump Command /info/dumpUfd clear Menu informationNtp clear Port Statistics Menu AuthSuccessesWhile Authenticating802.1x statistics Supplicant Bridging statisticsBackendNonNakResponsesFrom Ethernet statistics Dot3StatsInternalMacTransmitErrors Dot3StatsFCSErrorsDot3StatsSingleCollisionFrames Dot3StatsMultipleCollisionFramesInterface statistics Link statistics Internet Protocol IP statisticsPort Rmon statistics FDB statistics Layer 2 statisticsLayer 3 statistics Lacp statisticsArp clear Clrigmp 1- 4095 allGEA Layer 3 statistics GEA Layer 3 statistics menuIP statistics GEAARP statistics Route statisticsIcmp statistics DNS statisticsTCP statistics UDP statistics Ospf statistics menu Igmp Multicast Group statisticsOspf global statistics Nbr change Tx ls UpdatesVrrp statistics Timers KickoffRIP statistics Management Processor statisticsPacket statistics RIP ALL Stats Information10ad41e8/10ad5790 AllocsACL statistics Access Control List ACL statistics menuCPU statistics Snmp statistics Only NTP statistics Uplink Failure Detection statistics Command /stats/dumpStatistics dump Number of times LtM link in BlockingRmon Configuration MenuViewing, applying, reverting, and saving changes Saving the configurationViewing pending changes Applying pending changesReminders System configurationLine to end System host log configurationBannr 1-80 characters Host IP addressLog featureall enabledisable Secure Shell Server configurationConsole disableenable Command /cfg/sys/radius Radius server configurationIntrval Sshport TCP port numberTACACS+ server configuration Port TCP port number Telnet enabledisableSystem Snmp configuration NTP server configurationDlight disableenable Command /cfg/sys/ssnmpCharacters SNMPv3 configurationName 1-64 characters V1v2 disableenable User Security Model configurationName 1-32 characters SNMPv3 View configurationTree 1-32 characters Mask 1-32 charactersSNMPv3 Group configuration View-based Access Control Model configurationUsmsnmpv1snmpv2 Level NoAuthNoPrivauthNoDel Deletes the vacmSecurityToGroup entry Cur SNMPv3 Community Table configurationUsmsnmpv1snmpv2 Uname SNMPv3 Target Parameters Table configuration SNMPv3 Target Address Table configurationAddr transport Address ip Port transportSnmpv1snmpv2csnmp Model SNMPv3 Notify Table configurationManagement Networks configuration System Access configurationUseroperadmin Name User Access Control configurationUser ID configuration Access enabledisable Port configurationHttps Access configuration Name 1-64 characters none Temporarily disabling a port Port link configurationPort ACL/QoS configuration Layer 2 configuration802.1x configuration Mode force 802.1x Global configurationUnauthautoforce-auth TxperiodReauth onoff 802.1x Port configurationRev Mode rstpmstpCist Common Internal Spanning Tree configurationBridge parameter menu Port parameter menuCist port configuration Cist bridge configurationEdge disableenable Spanning Tree configurationCost Link autop2psharedBridge Spanning Tree configuration Spanning Tree port configuration Fastfwd disableenable Forwarding Database configurationStatic FDB configuration MAC address Vlan port Trunk configurationClear mac MAC AddressVLAN 1-4095 Port port numberAll Add port numberLink Aggregation Control Protocol configuration IP Trunk Hash configurationLayer 2 IP Trunk Hash configuration Vlan configuration Lacp Port configurationTimeout shortlong Mode offactivepassiveDef list of port numbers Layer 3 configurationMask IP subnet mask IP interface configurationAddr IP address Default Gateway configuration IP Static Route configurationIP Forwarding configuration Address Resolution Protocol configurationNetwork Filter configuration Dirbr disableenableLp 0-4294967294 none Route Map configurationAp AS number AS number AS Autonomous System Path configuration IP Access List configurationMetric 1-4294967294none Action permitdenyCurrent Display current RIP configuration Routing Information Protocol configurationRIP on Off Globally turnRIP Interface configuration OFF Open Shortest Path First configurationRIP Route Redistribution configuration Default 1-16777215 12none Osfp Area Index configurationMd5key 1-255 characters Redist fixedstaticripAuth nonepasswordmd5 Ospf Summary Range configurationAreaid IP address Type transitstubnssaMask IP address mask Ospf Interface configurationKey key stringnone Mdkey 1-255noneNbr IP address Ospf Virtual Link configurationKey password Ospf Route Redistribution configuration Ospf Host Entry configurationRem 1-32 1-32 ... all Export 1-16777215 12noneOspf MD5 Key configuration Igmp configurationAggr disableenable Igmp snooping configurationFastlv 1-4095 disableenable Srcip IP addressIgmp filtering configuration Igmp static multicast router configurationAdd port number 1-4095 FilterIgmp filter definition Igmp filtering port configurationRange IP multicast address IP Multicast addressDomain Name System configuration Bootstrap Protocol Relay configurationVrrp Virtual Router configuration Virtual Router Redundancy Protocol configurationCur Display current Vrrp configuration Vrrp onPreem disableenable Vrrp Virtual Router Group configuration Vrrp Virtual Router Priority Tracking configurationVrrp Virtual Router Group Priority Tracking configuration Vrrp Tracking configuration Vrrp Interface configurationPassw password Del CurQoS 802.1p configuration Quality of Service configurationAccess Control configuration Egrport port number Access Control List configurationAction permitdenysetprio Stats edACL IP Version 4 Filter configuration ACL Ethernet Filter configurationFlags value 0x0-0x3f ACL TCP/UDP Filter configurationSport 1-65535 port mask ACL Re-mark configuration ACL Meter configurationEnable ed CirACL Re-mark Out-of-Profile configuration ACL Re-mark In-Profile configurationACL Re-mark In-Profile Update User Priority configuration ACL Group configuration Remote Monitoring configurationACL Packet Format configuration Owner 1-127 characters Rmon history configurationIfoid 1-127 characters Rmon alarm configuration Rmon event configurationDescn 1-127 characters Type nonelogtrapbothRlimit -2147483647 to Port mirroring2147483647 Flimit -2147483647 toPort-based port mirroring Uplink Failure Detection configurationAdd mirrored port inoutboth Rem mirrored portLink to Monitor configuration Failure Detection Pair configurationAddport port number Remport port numberLink to Disable configuration Saving the active switch configurationDump Addport port number Remport port numberConfiguration# gtcfg FTP/TFTP server filename Restoring the active switch configurationCommand /cfg/gtcfg FTP/TFTP server filename Operations-level port options Operations MenuOperations-level Vrrp options Reset ReauthOperations-level port 802.1x options Downloading new software to the switch Updating the switch software imageAddress Selecting a software image to runSelecting a configuration block Uploading a software image from the switchBoot Options# ptimg Boot Options# confAccessing the Iscli Resetting the switchBoot Options# reset Boot Options# curMaintenance Menu Forwarding Database options System maintenance optionsFlags new Nvram flags word as 0xXXXXXXXXARP cache options Debugging optionsIgmp IP Route Manipulation optionsIgmp Multicast Group options Igmp Mrouter options Igmp Snooping optionsClearing dump information Uuencode flash dumpFTP/TFTP system dump put Command /maint/panic Panic commandConfirm dump and reboot y/n y Unscheduled system dumpsIndex
Related manuals
Manual 58 pages 49.74 Kb

GbE2c specifications

The HP GbE2c is a high-performance Ethernet Switch designed to meet the increasing demands of data center environments. As a critical component in Hewlett-Packard's networking lineup, the GbE2c provides a seamless blend of speed, reliability, and advanced networking capabilities, making it an essential tool for enterprises aiming to enhance their network infrastructure.

One of the standout features of the HP GbE2c is its support for Gigabit Ethernet, which allows for high-speed data transmission and reduced latency. This switch is designed to support the growing bandwidth needs of modern applications, ensuring that data is transmitted quickly and efficiently across the network. The GbE2c is particularly beneficial for organizations implementing virtualization technologies, as its Gigabit interfaces help in optimizing data flow between virtual machines.

The GbE2c also incorporates advanced Layer 2 and Layer 3 switching capabilities. This ensures that it can handle both basic and more complex networking tasks, such as routing traffic between different VLANs and enabling Internet Protocol (IP) addressing. The switch supports various protocols, enabling seamless integration into a wide range of network environments.

Additionally, the HP GbE2c is equipped with a robust management system that allows network administrators to easily configure and monitor network settings. With its user-friendly interface, administrators can gain insights into traffic patterns, performance metrics, and potential issues, helping to maintain optimal network performance.

Power efficiency is another key characteristic of the HP GbE2c. The switch is designed to minimize power consumption without sacrificing performance, making it a more sustainable choice for data centers aiming to reduce their carbon footprint. This energy-efficient design is crucial for enterprises looking to lower operational costs while maintaining a high level of service.

The HP GbE2c also boasts high availability features, including redundant power supplies and failover options, ensuring that the network remains operational even in the event of a component failure. This reliability is critical for businesses that require uninterrupted network access for their daily operations.

In summary, the HP GbE2c Ethernet Switch combines speed, versatility, and efficiency, making it an ideal choice for businesses seeking to enhance their networking capabilities. Its robust feature set, advanced management options, and focus on energy efficiency position it as a top-tier solution in the competitive networking landscape. Organizations can rely on the GbE2c to deliver high performance and reliability, thus meeting the demands of today's data-intensive environments.
Top Page Image Contents