HP GbE2c manual Igmp static multicast router configuration, Igmp filtering configuration, Filter

Page 138

IGMP static multicast router configuration

Command: /cfg/l3/igmp/mrouter

[Static

Multicast Router

Menu]

add

- Add port as Multicast Router Port

rem

- Remove port as

Multicast Router Port

cur

- Display current Multicast Router configuration

 

 

 

The following table describes the Static Multicast Router Configuration Menu options.

NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast routers is disabled for that VLAN.

Table 144 IGMP Static Multicast Router Menu

Command

Description

 

 

add <port number> <1-4095><1-2>

Selects a port/VLAN combination on which the static multicast router

 

is connected, and configures the IGMP version (1 or 2) of the

 

multicast router.

NOTE: Port number must be an external port (19-24).

remove <port number> <1-4095><1-2>Removes a static multicast router from the selected port/VLAN combination.

cur

Displays the current IGMP Static Multicast Router parameters.

 

 

IGMP filtering configuration

Command: /cfg/l3/igmp/igmpflt

[IGMP Filter Menu]

filter - IGMP Filter Definition Menu port - IGMP Filtering Port Menu ena - Enable IGMP Filtering

dis - Disable IGMP Filtering

cur - Display current IGMP Filtering configuration

The following table describes the IGMP Filter Configuration Menu options.

Table 145 IGMP Filtering Menu

Command

Description

 

 

filter <1-16>

Displays the IGMP Filter Definition Menu.

 

 

port <port number>

Displays the IGMP Filtering Port Menu.

 

 

ena

Enables IGMP filtering globally.

 

 

dis

Disables IGMP Filtering globally.

 

 

cur

Displays the current IGMP Filtering parameters.

 

 

Configuration Menu 138

Page 137 Page 139
Image 138
Page 137 Page 139
Contents HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Page Contents Statistics Menu Configuration Menu 111 Index Command line interface Additional references Connecting to the switchIntroduction Establishing a console connectionEstablishing a Telnet connection Setting an IP addressTelnet GbE2c Ethernet Blade Switch IP address Establishing an SSH connectionAccessing the switch # ssh user@GbE2c Ethernet Blade Switch IP addressIdle timeout Typographical conventions AaBbCc123Main Menu Menu summaryGlobal commands DelayTraceroute host name IP address max-hops msec Command line history and editing Telnet hostname IP address portCommand abbreviation Command line interface shortcutsCommand stacking Tab completionMain# /cfg Configuring Simple Network Management Protocol support# /cfg/sys/access/snmp disableread onlyread/write # /cfg/sys/ssnmp/rcommwcommSetting passwords Changing the default administrator passwordSystem# apply System# save Changing the default user password Changing the default operator password Information Menu Menu overviewSystem Information Menu SNMPv3 Information MenuHMACSHA, DES Privacy SNMPv3 USM User Table informationHMACMD5, DES Privacy No AUTH, no PrivacySNMPv3 Access Table information SNMPv3 View Table informationSNMPv3 Group Table information SNMPv3 Community Table informationPrefix SNMPv3 Target Address Table information SNMPv3 Target Parameters Table informationCommand /info/sys/snmpv3/notify NameTag V1v2trapv1v2trap SNMPv3 Notify Table informationSec Level SNMPv3 dump System information Show last 100 syslog messages System user informationCfg/sys/access/user/uid command Layer 2 information8021x Stp FDB information menu Find MAC address VlanPort port number Vlan Link Aggregation Control Protocol informationShow all FDB information TRKLacp dump 802.1x information Command /info/l2/stp Port Auth Mode Auth StatusAuthenticator PAE State Spanning Tree informationPriority bridge Current RootPath-Cost HelloRapid Spanning Tree and Multiple Spanning Tree information DSB Disc FWDP2P Disabled DSB Common Internal Spanning Tree information DSBDisabled DSB Trunk group informationDiscarding Disc , Learning LRN , Forwarding FWD , or Vlan information Layer 2 general informationLayer 3 information Gw IP address Route informationFind IP address If IP addressShow all IP Route information ARP ARP informationShow all ARP entry information VlanOspf information Nbr nbr router-id A.B.C.DDbase Sumaddr Nsumadd Routes Dump Ospf Database information menu Ospf general informationOspf interface information AsbrExt adv-rtr A.B.C.D linkstateid A.B.C.Dself Advrtr router-id A.B.C.DAsbrsum adv-rtr A.B.C.D Linkstateid A.B.C.Dself Nw adv-rtr A.B.C.D linkstateid A.B.C.DselfRIP Routes information Ospf route codes informationRouting Information Protocol information RIPRIP user configuration IP informationIgmp multicast group information Command /info/l3/vrrp Vrrp information Igmp multicast router port informationVrrp information QoS Menu 8021p Show QOS 802.1p information QoS information802.1p information 8021pACL information Rmon Information MenuVID Rmon history information IfoidInterval Rmon event information Rmon alarm informationCommand /info/rmon/event OIDLink status information Name Command /info/port Port Tag Rmon PvidPort information VLANsUplink Failure Detection information DisabledLogical Port to GEA Port mapping STGCommand /info/dump Information dumpMenu information Ntp clearUfd clear Port Statistics Menu Authenticating 802.1x statisticsAuthSuccessesWhile Bridging statistics BackendNonNakResponsesFromSupplicant Ethernet statistics Dot3StatsSingleCollisionFrames Dot3StatsFCSErrorsDot3StatsInternalMacTransmitErrors Dot3StatsMultipleCollisionFramesInterface statistics Internet Protocol IP statistics Link statisticsPort Rmon statistics Layer 2 statistics FDB statisticsArp clear Lacp statisticsLayer 3 statistics Clrigmp 1- 4095 allIP statistics GEA Layer 3 statistics menuGEA Layer 3 statistics GEARoute statistics ARP statisticsDNS statistics Icmp statisticsTCP statistics UDP statistics Igmp Multicast Group statistics Ospf statistics menuOspf global statistics Tx ls Updates Nbr changeTimers Kickoff Vrrp statisticsPacket statistics Management Processor statisticsRIP statistics RIP ALL Stats InformationAllocs 10ad41e8/10ad5790Access Control List ACL statistics menu CPU statisticsACL statistics Snmp statistics Only NTP statistics Statistics dump Command /stats/dumpUplink Failure Detection statistics Number of times LtM link in BlockingConfiguration Menu RmonViewing pending changes Saving the configurationViewing, applying, reverting, and saving changes Applying pending changesSystem configuration RemindersBannr 1-80 characters System host log configurationLine to end Host IP addressSecure Shell Server configuration Console disableenableLog featureall enabledisable Intrval Radius server configurationCommand /cfg/sys/radius Sshport TCP port numberTACACS+ server configuration Telnet enabledisable Port TCP port numberDlight disableenable NTP server configurationSystem Snmp configuration Command /cfg/sys/ssnmpSNMPv3 configuration Name 1-64 charactersCharacters User Security Model configuration V1v2 disableenableTree 1-32 characters SNMPv3 View configurationName 1-32 characters Mask 1-32 charactersUsmsnmpv1snmpv2 Level View-based Access Control Model configurationSNMPv3 Group configuration NoAuthNoPrivauthNoSNMPv3 Community Table configuration Usmsnmpv1snmpv2 UnameDel Deletes the vacmSecurityToGroup entry Cur Addr transport SNMPv3 Target Address Table configurationSNMPv3 Target Parameters Table configuration Address ip Port transportSNMPv3 Notify Table configuration Snmpv1snmpv2csnmp ModelSystem Access configuration Management Networks configurationUser Access Control configuration User ID configurationUseroperadmin Name Port configuration Https Access configurationAccess enabledisable Name 1-64 characters none Port link configuration Temporarily disabling a portLayer 2 configuration 802.1x configurationPort ACL/QoS configuration Unauthautoforce-auth 802.1x Global configurationMode force Txperiod802.1x Port configuration Reauth onoffMode rstpmstp RevBridge parameter menu Common Internal Spanning Tree configurationCist Port parameter menuCist bridge configuration Cist port configurationCost Spanning Tree configurationEdge disableenable Link autop2psharedBridge Spanning Tree configuration Spanning Tree port configuration Forwarding Database configuration Static FDB configurationFastfwd disableenable Clear mac MAC AddressVLAN 1-4095 Port port numberAll Trunk configurationMAC address Vlan port Add port numberIP Trunk Hash configuration Layer 2 IP Trunk Hash configurationLink Aggregation Control Protocol configuration Timeout shortlong Lacp Port configurationVlan configuration Mode offactivepassiveLayer 3 configuration Def list of port numbersIP interface configuration Addr IP addressMask IP subnet mask IP Static Route configuration Default Gateway configurationNetwork Filter configuration Address Resolution Protocol configurationIP Forwarding configuration Dirbr disableenableRoute Map configuration Ap AS number AS number ASLp 0-4294967294 none Metric 1-4294967294none IP Access List configurationAutonomous System Path configuration Action permitdenyRIP on Routing Information Protocol configurationCurrent Display current RIP configuration Off Globally turnRIP Interface configuration Open Shortest Path First configuration RIP Route Redistribution configurationOFF Md5key 1-255 characters Osfp Area Index configurationDefault 1-16777215 12none Redist fixedstaticripAreaid IP address Ospf Summary Range configurationAuth nonepasswordmd5 Type transitstubnssaKey key stringnone Ospf Interface configurationMask IP address mask Mdkey 1-255noneOspf Virtual Link configuration Key passwordNbr IP address Rem 1-32 1-32 ... all Ospf Host Entry configurationOspf Route Redistribution configuration Export 1-16777215 12noneIgmp configuration Ospf MD5 Key configurationFastlv 1-4095 disableenable Igmp snooping configurationAggr disableenable Srcip IP addressAdd port number 1-4095 Igmp static multicast router configurationIgmp filtering configuration FilterRange IP multicast address IP Igmp filtering port configurationIgmp filter definition Multicast addressBootstrap Protocol Relay configuration Domain Name System configurationCur Display current Vrrp configuration Virtual Router Redundancy Protocol configurationVrrp Virtual Router configuration Vrrp onPreem disableenable Vrrp Virtual Router Priority Tracking configuration Vrrp Virtual Router Group configurationVrrp Virtual Router Group Priority Tracking configuration Passw password Vrrp Interface configurationVrrp Tracking configuration Del CurQuality of Service configuration Access Control configurationQoS 802.1p configuration Action permitdenysetprio Access Control List configurationEgrport port number Stats edACL Ethernet Filter configuration ACL IP Version 4 Filter configurationACL TCP/UDP Filter configuration Sport 1-65535 port maskFlags value 0x0-0x3f Enable ed ACL Meter configurationACL Re-mark configuration CirACL Re-mark In-Profile configuration ACL Re-mark In-Profile Update User Priority configurationACL Re-mark Out-of-Profile configuration Remote Monitoring configuration ACL Packet Format configurationACL Group configuration Rmon history configuration Ifoid 1-127 charactersOwner 1-127 characters Descn 1-127 characters Rmon event configurationRmon alarm configuration Type nonelogtrapboth2147483647 Port mirroringRlimit -2147483647 to Flimit -2147483647 toAdd mirrored port inoutboth Uplink Failure Detection configurationPort-based port mirroring Rem mirrored portAddport port number Failure Detection Pair configurationLink to Monitor configuration Remport port numberDump Saving the active switch configurationLink to Disable configuration Addport port number Remport port numberRestoring the active switch configuration Command /cfg/gtcfg FTP/TFTP server filenameConfiguration# gtcfg FTP/TFTP server filename Operations Menu Operations-level port optionsReset Reauth Operations-level port 802.1x optionsOperations-level Vrrp options Updating the switch software image Downloading new software to the switchSelecting a software image to run AddressBoot Options# ptimg Uploading a software image from the switchSelecting a configuration block Boot Options# confBoot Options# reset Resetting the switchAccessing the Iscli Boot Options# curMaintenance Menu Flags new Nvram flags word as System maintenance optionsForwarding Database options 0xXXXXXXXXDebugging options ARP cache optionsIP Route Manipulation options Igmp Multicast Group optionsIgmp Igmp Snooping options Igmp Mrouter optionsUuencode flash dump FTP/TFTP system dump putClearing dump information Confirm dump and reboot y/n y Panic commandCommand /maint/panic Unscheduled system dumpsIndex
Related manuals
Manual 58 pages 49.74 Kb

GbE2c specifications

The HP GbE2c is a high-performance Ethernet Switch designed to meet the increasing demands of data center environments. As a critical component in Hewlett-Packard's networking lineup, the GbE2c provides a seamless blend of speed, reliability, and advanced networking capabilities, making it an essential tool for enterprises aiming to enhance their network infrastructure.

One of the standout features of the HP GbE2c is its support for Gigabit Ethernet, which allows for high-speed data transmission and reduced latency. This switch is designed to support the growing bandwidth needs of modern applications, ensuring that data is transmitted quickly and efficiently across the network. The GbE2c is particularly beneficial for organizations implementing virtualization technologies, as its Gigabit interfaces help in optimizing data flow between virtual machines.

The GbE2c also incorporates advanced Layer 2 and Layer 3 switching capabilities. This ensures that it can handle both basic and more complex networking tasks, such as routing traffic between different VLANs and enabling Internet Protocol (IP) addressing. The switch supports various protocols, enabling seamless integration into a wide range of network environments.

Additionally, the HP GbE2c is equipped with a robust management system that allows network administrators to easily configure and monitor network settings. With its user-friendly interface, administrators can gain insights into traffic patterns, performance metrics, and potential issues, helping to maintain optimal network performance.

Power efficiency is another key characteristic of the HP GbE2c. The switch is designed to minimize power consumption without sacrificing performance, making it a more sustainable choice for data centers aiming to reduce their carbon footprint. This energy-efficient design is crucial for enterprises looking to lower operational costs while maintaining a high level of service.

The HP GbE2c also boasts high availability features, including redundant power supplies and failover options, ensuring that the network remains operational even in the event of a component failure. This reliability is critical for businesses that require uninterrupted network access for their daily operations.

In summary, the HP GbE2c Ethernet Switch combines speed, versatility, and efficiency, making it an ideal choice for businesses seeking to enhance their networking capabilities. Its robust feature set, advanced management options, and focus on energy efficiency position it as a top-tier solution in the competitive networking landscape. Organizations can rely on the GbE2c to deliver high performance and reliability, thus meeting the demands of today's data-intensive environments.
Top Page Image Contents