Using Neoware Firewall
Configuring Neoware Firewall
Introduction
Starting the
Configuration
Utility
Neoware Firewall is disabled by default. If you are using ezUpdate and have configured your FTP server to use passive data connec- tions, you will need to configure Neoware Firewall for passive FTP before enabling it. Since passive FTP servers may be configured to use a range of ports anywhere between 1024 and 65535, there is no way of
Neoware Firewall is configured using a utility that is accessed from the Start menu. To run the utility, select Start > All Programs >
Neoware Firewall Configuration Utility.
The utility will display an introductory screen then a dialog listing all the currently defined firewall filters.