Using Neoware Firewall
| Assign | A check box indicating the status of the filter | |
|
|
| (assigned or unassigned). |
| Filter Name | The name of the firewall filter. | |
| Action | Indicates whether the filter Blocks or Permits data | |
|
|
| flow. |
| Description | Provides a description of what the filter does. | |
Changing the Filter | To change the assignment of a filter: | ||
Assignment | 1 | Click the check box next to any of the listed filters to change its | |
| |||
|
| status (assigned or unassigned). | |
| 2 | Click the Save button to make the changed setting take immedi- | |
|
| ate effect. |
|
Editing a Filter | To edit a currently defined filter: | ||
| 1 | Select the filter to edit by clicking on the filter line in the list of | |
|
| defined filters. | |
| 2 | Click the Edit button to display the Filter Properties dialog. |
This is almost the same as the Add a Filter dialog (which is described in the section “Adding a New Filter” on page 39), except that you cannot change the filter’s name or description.