h
SAN Manager LM 1.2 for Windows NT
Release Notes
New In This Release
SOFTWARE COMPATIBILITY
SAN Manager LM is compatible with Windows NT 4.0 with Service Pack 4 or later. However, due to the limitations discussed in the first paragraph under Known Issues on page 3, HP recommends Service Pack 6a.
HARDWARE COMPATIBILITY
With the release of version 1.2, SAN Manager LM now supports the following hardware:
RAIDs
–EMC Symmetrix 3000 Devices (SCSI)
–HP SureStore E Disk Array XP256 (SCSI)
Note | EMC Symmetrix 3000 (SCSI) devices and XP256 (SCSI) devices are only compatible |
| with SAN Manager LM when they are configured with a Crossroads bridge and |
| QLogic HBAs. |
|
|
– HP SureStore E Disk System FC60 with version 7.02.27.01 or later of the RDAC driver
QUALIFIED HBAS
The following HBAs are the only HBAs that are qualified for use with SAN Manager LM on Windows NT hosts:
– QLogic QLA2100 and QLA2200 with the HP SAN Manager LM QLogic HBA driver
Note For an
Page 1 of 7 |