QLogic HBA Issues
–The BIOS must be disabled on the HBA. Failure to disable the BIOS can result in unstable operation and compromised storage.
–The HP SAN Manager LM QLogic HBA driver (trqladrv.sys) does not support
–If you choose not to install the HP SAN Manager LM QLogic HBA driver during the SAN Manager LM installation procedure, and later you decide to use the HP SAN Manager LM QLogic HBA driver, you must uninstall and then reinstall SAN Manager LM.
NEW FEATURES
SAN Manager
LUN Identification – LUNs that are related (same unit of storage with a different WWN) can now be identified through SAN Manager LM’s device shortcut menu. This capability simplifies the management of
Device Locking – Inadvertent changes to devices can now be prevented by the device locking feature. A locked device cannot be assigned, unassigned, moved to another device group, or
OTHER ENHANCEMENTS
Host Information Dialog Box – This dialog box provides information about the installed operating system and SAN Manager LM components on a selected host.
Note | When viewing the host information of hosts that are running SAN Manager LM 1.1.1 |
| and earlier, the dialog box lists only the host ID and SAN Manager LM service |
| version. |
| This feature is currently supported on Windows NT hosts only. |
|
|
Host Settings Dialog Box – This dialog box allows users to view and change
Note This feature is currently supported on Windows NT hosts only.
Page 2 of 7 |