Sample Configurations
Example Four - Two Servers with NFS
The first line in the customer_defined_run_cmds function executes the nfs1_xmnt script locally on host thyme (the primary node for pkg01). The second line, beginning with remsh, executes the nfs1_xmnt script remotely on host basil.
If pkg01 fails to come up, or if the remsh to host basil fails, the file system will not be mounted, and no error will be returned. The only way to be sure the file system was mounted successfully is to run the nfs1_xmnt script manually on both host thyme and host basil.
The only
SNFS[0]=”nfs1:/hanfs/nfsu011”; CNFS[0]=”/nfs/nfsu011”
In the SNFS[0] variable, “nfs1” is the name that maps to the relocatable IP address of pkg01. It must be configured in the name service the host is using (DNS, NIS, or the /etc/hosts file). If you do not want to configure a name for the package, you can just specify the IP address in the SNFS[0] variable, as follows:
SNFS[0]=”15.13.114.243:/hanfs/nfsu011”;
CNFS[0]=”/nfs/nfsu011”
The client mount point, specified in the CNFS[0] variable, must be different from the location of the file system on the server (SNFS[0]).
The hanfs.sh Control Script
This section shows the NFS control script (hanfs1.sh) for the pkg01 package in this sample configuration. This example includes only the
XFS[0]=/hanfs/nfsu011
NFS_SERVICE_NAME[0]="nfs1.monitor
NFS_SERVICE_CMD[0]="/etc/cmcluster/nfs/nfs.mon"
NFS_FILE_LOCK_MIGRATION=0
NFS_FLM_SCRIPT="${0%/*}/nfs.flm"
Chapter 3 | 87 |