HP Microsoft Virtual Server Software manual VLANs with Hyper-V

Page 11

VLANs with Hyper-V

Hyper-V supports VLANs. To enable this functionality, complete the following steps:

1.Install and enable Hyper-V in the operating system, and then install the NCU.

2.Open the NCU. In the Team Properties window, configure the NIC team(s). Note that Jumbo Frames are supported for Windows® Server 2008 R2 Hyper-V but not for Microsoft® Windows® Server 2008 Hyper-V.

3.Highlight VLAN Promiscuous and click Enabled as shown below.

4.Within server manager, open virtual network manager and select the team name created in steps 2 and 3.

5.Under settings, find the team and create a new virtual network.

11

Image 11
Contents HOWTO, 4TH Edition Software requirements IntroductionUninstalling teaming software Page Creating an HP Network Team De-select Page Page Page Dissolving an HP Network Team VLANs with Hyper-V End of procedure Call to action For more information