HP Microsoft Virtual Server Software manual Creating an HP Network Team

Page 5

Creating an HP Network Team

Once you have installed the HP Network Configuration Utility, a network team may not be created if you selected any of the network interfaces to be configured as part of a team under HP Network Configuration Utility during the installation of Hyper-V. To create an HP Network Team, proceed as follows.

1.If any network interfaces were selected during the installation of Hyper-V, remove them from the Virtual Network Manager: Select the interface in the left hand navigation screen and click the remove button.

2.Once you have removed all intended network interfaces from the navigation window, click OK to apply the changes. A confirmation pop-up will appear to confirm the changes to the Microsoft Virtual Network; click Yes to continue.

3.With the installation of Hyper-V, Microsoft installs and binds the Microsoft Virtual Network Switch Protocol to the network interfaces. You must de-select this in the properties window for each network interface to be configured as part of a team in HP Network Configuration Utility.

5

Image 5
Contents HOWTO, 4TH Edition Software requirements IntroductionUninstalling teaming software Page Creating an HP Network Team De-select Page Page Page Dissolving an HP Network Team VLANs with Hyper-V End of procedure Call to action For more information