HP Medical Archive Solution manual Introduction, System Audit Messages

HPMA Audit Message Reference

Introduction

This chapter provides detailed descriptions of the attributes reported in all audit messages issued by the system.

Messages are listed alphabetically to facilitate referencing the content for a specific message of interest. To reference related messages for a given class of activity, use the tables in the subsections below.

System Audit Messages

This group of messages are for events related to:

•The auditing system itself

•Grid node states

•Grid-wide task activity (Grid Tasks)

•Service backup operations

•File System Gateway (FSG) replications

Table 3: System Audit Messages

Code	Description	Page
ETCA	TCP/IP Connection Establish—An incoming or outgoing TCP/IP	37
	connection was successfully established.
ETCC	TCP/IP Connection Close—An established connection has been	38
	closed by either side of the connection (normally or abnormally).
ETCF	TCP/IP Connection Fail—An outgoing connection attempt failed at	38
	the lowest level, due to communication problems.
SADD	Security Audit Disable—Audit message logging has been turned	56
	off.
SADE	Security Audit Enable—Audit message logging has been turned on.	57
ETAF	Security Authentication Failed—A connection attempt using Trans-	36
	port Layer Security (TLS) has failed.
SYSU	Node Start—An HP Medical Archive grid service started; the nature	60
	of the previous shutdown is indicated in the message.
SYSD	Node Stop—An HP Medical Archive grid service has been grace-	57
	fully stopped.

12

HP Medical Archive