HP Medical Archive Solution manual CBRE-Object Receive End Fields

HPMA Audit Message Reference

system data flow, and when combined with storage audit messages, to verify replica counts.

CBRE—Object Receive End

When transfer of a content block from one node to another is com- pleted, this message is issued by the destination entity.

Table 11: CBRE—Object Receive End Fields

Code	Field	Description
CNID	Connection	The unique identifier of the node-to-node content block
	Identifier	transfer.
CBID	Content Block	The unique identifier of the content block being
	Identifier	transferred.
CTDR	Transfer Direction	Indicates if the CBID transfer was push-initiated or pull-
		initiated:
		PUSH—the transfer operation was requested by the
		sending entity.
		PULL—the transfer operation was requested by the
		receiving entity.
CTSR	Source Entity	The node ID of the source (sender) of the CBID transfer.
CTDS	Destination Entity	The node ID of the destination (receiver) of the CBID
		transfer.
CTSS	Start Sequence	Indicates the sequence count on which the transfer
	Count	started.
CTAS	Actual End	Indicates the last sequence count successfully trans-
	Sequence Count	ferred. If the Actual End Sequence Count is the same as
		the Start Sequence Count, and the Transfer Result was
		not successful, no data was exchanged.
RSLT	Transfer Result	The result of the transfer operation (from the perspective
		of the sending entity):
		SUCS—transfer successfully completed; all requested
		sequence counts were sent.
		CONL—connection lost during transfer
		CTMO—connection timed-out during establishment
		UNRE—destination node ID unreachable
		CRPT—transfer ended due to reception of corrupt or
		invalid data (may indicate tampering)

20

HP Medical Archive