Receiving images and text files

You can send or receive multiple files at the same time.

You can receive contacts, appointments, and tasks, using Network or Infrared services, from within any Microsoft Pocket Outlook program or the Exchanger program, regardless of the program you use to begin the receiving process. However, to view the information you receive, you must use the appropriate program.

You can receive documents and image files, using Network or Infrared services, from a variety of JetSend-enabled devices, regardless of the program you use to begin the receiving process. However, to view the information you receive, you must use the appropriate program.

You can send or receive multiple files at the same time.

Exchanger files. (See “Viewing files” on page 8. You may need to select View > Refresh to see the received files.)

1	On the receiving device, select Start > Programs > JetSend > Exchanger.
2	Select the	icon at the top of the screen to place the mobile device in
	receive mode. While in receive mode, the device listens on all available
	transports for any incoming JetSend activity.
3	On the sending device, start the exchange by infrared or network.

4	When the exchange is complete, open the file in the Viewer on the mobile
	device to verify that the document or image arrived in the default location of

Receiving contacts, appointments, and tasks

You can set the default for how JetSend handles received contacts, appointments, and tasks that duplicate ones already in your mobile device. (See “Default action for receiving contact, appointment, and task information” on page 3.)

1 On the receiving device, start the Calendar, Contacts, or Tasks program.

2Select Tools > JetSend Receive to place the mobile device in receive mode. While in receive mode, the device listens on all available transports for any incoming JetSend activity.

3On the sending device, start the exchange by infrared or network.

4When the exchange is complete, check the appropriate Pocket Outlook component on the receiving device to see if the information has been added.

EN	Using the Exchanger functions 7