HP Jetsend for manual Importing and exporting files, Creating an infrared connection

Using the Exchanger functions

Importing and exporting files

Use the import procedure to copy files to the JetSend Exchanger folder. (For information about setting which folder is the JetSend Exchanger folder, see

￿“Default location of Exchanger files” on page 2.)

Use the export procedure to copy received files to the appropriate folders.

1Select Start > Programs > JetSend > Exchanger.

2To import: Select File > Import, locate and select the file you want to import, and then select OK. The file is copied into the current folder.

To export: Select the files you want to copy, select File > Export, locate the folder into which you want to copy the files, and then select OK.

Creating an infrared connection

On the two devices, align the infrared ports with each other.

30-degree angle

Sending

device

Infrared Receiving

ports device

The two devices must be within 3 ft (1 m) of each other, but no closer than 2 in (5.08 cm).

The infrared ports of the two devices must be lined up within a

￿30-degree angle of each other.

There must be no obstacles between the infrared ports of the two devices.

EN Using the Exchanger functions 5