Sending images and text files

You can send text or image files using Network or Infrared services by

dragging the file to the corresponding icon in the Exchanger. You can send or receive multiple files at the same time.

1Select Start > Programs > JetSend > Exchanger.

2Make sure that the receiving device is turned on and ready to accept your exchange.

Infrared: Set up an infrared connection between your mobile device and

the receiving device.

Network: Make sure that the mobile device is connected to the network.

3On the sending device, drag the files to a JetSend service on the right side of the screen.

4For network exchanges, drag the files to the specific network recipient. Or drag the files to New Connection, enter the name and IP address for the connection, and click OK.

5When the exchange is complete, check the receiving device to verify that the exchange took place.

6 Using the Exchanger functions