9.3.Select the network address you want to add and then press [Enter].
9.4.To delete unwanted network addresses from the list, mark them and then press [Delete].
9.5.When prompted to “Save Specified Changes?”, select Yes.
10.Press [Esc] to return to the HP Printer Gateway Configuration menu screen (Actual menu title is: Configuration).
11.Press [F10] to display the Available Printers menu screen.
Note: If a printer you expected to see does not appear in the list, see the Section: Creating HP Public Access Printers Manually (page 6)
12.When the Automatically search IP Public Access printers menu item is selected, the DNS Information menu screen is displayed. Proceed as follows:
12.1.To search for an IP printer with a DNS name, select the Enable DNS lookups menu item, and then press [Enter]. This action displays a list of available printers with DNS names.
12.2.To search for an IP printer with only a raw IP address, select the No DNS Lookups menu item, and then press [Enter]. This action displays a list of available printers with raw IP addresses.
Note: For a dynamic DNS environment where a printer gets a different IP address, but retains the same DNS name each time when it cycles power, the DNS name is the only way to address a printer properly.
13.Change configuration parameters as needed.
14.Press [F10] to save.
12