HP IP/IPX Gateway for NDPS manual Configuring HP IP/IPX Printer Gateway Settings

Configuring HP IP/IPX Printer Gateway Settings

The following settings can be configured:

•Maximum Service ThreadsSpecifies the maximum number of processes (threads) created to process jobs.

•Maximum Service ThreadsSpecifies the minimum number of processes (threads) created to process jobs.

•Service Thread Idle TimeoutSpecifies the timeout (in minutes) that job processes wait in an idle state before ending, until the Min Service Processes number is reached.

To configure the settings for the HP IP/IPX Printer Gateway

1.At the server console, toggle to the Hewlett-Packard NDPS Gateway screen.

2.Select the Configuration menu item from the Main Menu to start the Configuration menu screen.

3.Select the Gateway Configuration menu item to start the Gateway Configuration menu screen.

4.Select the menu item(s) you want to configure and then press [Enter].

5.Enter the value you want for the menu item parameter and then press [Enter] to save the new value or press [Esc] to restore the old value.

Note: See the Readme file for detailed information about each menu item.

6.Press [Esc] to return to the previous menu.

18