HP M Network Management Software Products manual Uninstall PCM+ 3.0 from the old server

Page 3

Uninstall PCM+ 3.0 from the old server

9)Go to the Start button > Control Panel > Add Remove Programs.

10)Locate and uninstall HP ProCurve Manager 3.0.

11)Reboot the server after the software has been uninstalled.

12)Remove all remaining traces of PCM+ 3.0.

∙Delete the PNM folder from C:\Program Files\Hewlett-Packard\PNM.

∙Delete any icons from the desktop for PCM+ 3.0.

Install PCM+ 3.0 on the new server hardware

If needed, a copy of the PCM software can be found on the HP ProCurve web site. Go to http://www.hp.com/rnd/software/j8991-c0300.htm to download and install PCM+ 3.0.

Record the new server hardware Install ID

13)Go to Tools > Preferences > Licensing and record the new server hardware installation identifier. The Install ID is required on the my.procurve portal.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents
Deactivate the current license Click on the Deactivated License tab Record the Uninstall keyUninstall PCM+ 3.0 from the old server Transfer License from old server to new server Click on Transfer licenses button Page Add the transferred license to the new server