HP UX System Management Software manual Updating from HP-UX 11i v2 to HP-UX 11i v3 1103 slide 3

DRD use case

Updating from HP-UX 11i v2 to HP-UX 11i v3 1103 (slide 3 of 4)

SWA

Report

HP-UX 11i v3 1103		HP-UX 11i v3 1103
	clone

1.Create a clone of the original system image (drd clone)

2.Run update-ux in preview mode on the active disk (update-ux-p)

3.Adjust file system sizes on the clone as needed (www.hp.com/go/drd-docs)

4.Activate the clone & boot when ready (drd activate)

5.Update the active image to HP-UX 11i v3 1103 (update-ux)

6.When update completes, have an active image with 11i v3 1103, and a clone with 11i v2 (drd status)

Could stop here, OR…

1.Create a clone of the active image (drd clone –x overwrite=true)

2.Use SWA to identify patches & fixes to security issues (drd mount, swa report, drd unmount)

Active

18