HP UX System Management Software Updating from HP-UX 11i v3 0903 to HP-UX 11i v3 1103 slide 3

DRD use case

Updating from HP-UX 11i v3 0903 to HP-UX 11i v3 1103 (slide 3 of 3)

Patches

SWA

Report

1.	Original system image is active
2.	Create a clone of the original system image
	(drd clone)
3.	When complete, two copies of system image
	exist (drd status)
4.	Update the inactive image to HP-UX 11i v3
	March 2009 or later (1103 or March 2011 in
	this case) (drd runcmd update-ux)
5.	When modification completes, have an
	original image with HP-UX 11i v3 0903,
	and a modified clone with HP-UX 11i v3 1103
6.	Use SWA to identify patches & fixes to security

HP-UX 11i v3 0903

HP-UX 11i v3 1103

Modified clone

Active

	issues (drd mount, swa report, drd umount)
7.	Install required patches (swa get, drd runcmd
	swinstall)
8.	Boot the clone when ready (drd activate)
9.	If original system preferred, boot the
	unmodified original image to return to
	original state (drd activate)

15