HP UX 11i Workload Management (gWLM/WLM) Software manual

Page 39

gwlmagent.properties on Windows. (The given Windows path is the default; however, a different path might have been selected at installation.)

NOTE: You must restart the gwlmagent daemon on each managed node where you have modified the properties file for the changes to the file to take effect.

The gwlmagent.properties file is shown below.

#

#(C) Copyright 2004-2007 Hewlett-Packard Development Company, L.P.

#$Date: 2008/12/02 20:17:18 $

#$Revision: 1.1 $

#

#Contents:

#This file contains the default configuration values for the

#Global Workload Manager Agent on a given managed node. The

#agent on each managed node uses the default values unless you

#edit that node's gwlmagent.properties file.

#

#You must restart gwlmagent for changes made to this file to

#take effect.

#

#

#Set FileHandler /var/opt/gwlm/gwlmagent.log.0 log level.

#Valid levels, from most severe to least, are:

#SEVERE

#WARNING

#INFO

#CONFIG

#FINE

#FINER

#FINEST

#When you set the level, you will see messages only from that level and

#the levels that are more severe. So, the SEVERE level produces the fewest

#messages, while the FINEST level includes messages from all seven levels.

com.hp.gwlm.util.Log.logLevel = INFO

#

#Specify the size (in MB) and number of files to use

#for logging. For a single file of unlimited size, set

#logFileSize to negative one (logFileSize=-1).

#Otherwise, total log file size is

#logFileSize * logNFiles

#

com.hp.gwlm.util.Log.logFileSize = 20 com.hp.gwlm.util.Log.logNFiles = 3

#

#Set the number of seconds for the high availability (HA) minimum

#timeout. Communication is considered lost on a managed node

#once the timeout period has elapsed.

#

#By default, communication is not considered lost until 10 allocation

#intervals have elapsed without communication. The default value of the

#property (60) is used only when the allocation interval is less than 6

#seconds.

#

com.hp.gwlm.node.HA.minimumTimeout = 60

#

#Enable/disable use of Instant Capacity (iCAP) to simulate movement of

#cores across nPartitions. To use iCAP, you must enable this property on

Setting gWLM properties 39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents HP Global Workload Manager 7.4 User Guide Acknowledgements Contents Support and other resources Additional configuration and administration tasksIndex GWLM Overview Benefits of using gWLMComparison of PRM, WLM, and gWLM features OverviewScheduler fss group. gWLM manages a workload by Concepts and terms for using gWLMWould make for a workload-without actually affecting SRD GWLM management modelHow gWLM allocates CPU resources Assumptions Available interfacesFinding more gWLM information Where to find additional informationLearn about other gWLM commands Policy types Configuring gWLM to manage workloadsPolicy types Choosing a policy type Choosing a policy typeCombining the different policy types Using the wizardSeeing how gWLM will perform without affecting the system Getting started with gWLM# /opt/gwlm/bin/gwlmagent Seeing gWLM in action# perl -e ’print $$\nwhile 1 ’ & 1 Fixing the amount of CPU resources a workload gets Common uses for gWLMSetting up gWLM initial setup steps Common configuration tasksCreating a new policy Changing from advisory mode to managed modeChanging which policy is associated with a workload Editing a policyStop managing a workload Adding a new compartment or GiCAP group member to an SRDStop managing an SRD Quick Link Option High-Level view Viewing gWLM reports in monitor-Only modeMonitoring workloads and gWLM Monitoring workloadsMessage logs Monitoring gWLM from the command lineHP-UX /var/opt/gwlm/gwlmcommand.log.0 Monitoring gWLM with GlancePlus Viewing HP Systems Insight Manager eventsSecuring database communications SecurityGeneral security topics Securing gWLM communicationsSecurity Manually adjusting CPU resources Additional configuration and administration tasksSetting aside space for historical data Manually adjusting memory resourcesTips for backup and restore Setting cache size for historical configuration dataSetting database recovery model Creating a database maintenance planCMS properties Setting gWLM propertiesSetting gWLM properties Agent properties # Severe # Warning # Info # Config # Fine # Finer # Finest Communications ports Controlling gWLM’s startup behavior# /opt/gwlm/bin/gwlmagent --enablestartonboot Related events How the automatic restart worksNode Failed to Rejoin SRD on Start-up event Manually clearing an SRD# gwlm undeploy --srd=SRD--force Nested partitions Nesting partitionsChanging the interval in HP System Insight Manager Using gWLM with Hyper-ThreadingChanging the interval on the command line Changing the gWLM resource allocation intervalShows a possible scenario Using gWLM with hosts on multiple LANsMultiple network interface cards Creating Golden ImagesGet the IP address configured for the host using nslookup Incorrectly configured host name or IP addressEnabling or disabling dumping core for gWLM Unable to create new native threadCore dump file is available in root directory Information to collect before contacting HP How to contact HPSubscription service Support and other resourcesHP authorized resellers Related informationTypographic conventions User input Documentation feedback Compatibility with agents Limitations Global Workload Manager known issuesCompatibility with PRM and WLM Unable to build a single shared resource domainMaking a configuration change to a large SRD is slow Rare incompatibility with virtual partitionsHost name aliases are not supported Integrity VM prevents discovery of psets and fss groups Deleting workloads takes a long timeInformation error during shutdown Process placement using psrset is ignoredCustom metrics lost on redeploy Major issues Remove old configuration data from the gWLM database Documentation or minor issuesCMS is slow to respond Cell-local processors and iCAP environmentError during discovery of compartments Combining psets and virtual partitionsModifying Java while gWLM is running Missing or unexpected historical data system clocks differ Sample missing at start or end of gwlmreport outputOnly one SRD is allowed to be deployed Scripts not placed in correct workloads Processes moved to default pset or default fss groupSRD deployment times out and displays a blank screen Application hangs in fss groupConfiguration of agent and CMS not synchronized Changes in sizes in DiscoveryUnable to remove workload from nested partitions SRD Negative current size for Nonvm Missing historical data gWLM CMS daemon/service restartedUnmanaging a VM or vPar that is on leaves SRD undeployed SRD IndexIndex

UX 11i Workload Management (gWLM/WLM) Software specifications

HP-UX 11i Workload Management (gWLM/WLM) software is an integral component of HP's premier UNIX operating system, designed to enhance system performance and resource management across diverse workloads. This advanced tool allows system administrators to monitor, control, and allocate resources effectively to achieve optimal performance, reliability, and service levels in enterprise environments.

One of the main features of gWLM/WLM is its ability to classify workloads and manage them according to specific policies set by the administrator. By using service level objectives (SLOs), administrators can define the performance criteria for various applications and workloads. gWLM continuously tracks these workloads, ensuring that they adhere to the defined SLOs, thus maintaining a high level of application performance.

The software employs resource pools, which segment resources such as CPU, memory, and I/O bandwidth among different workloads based on predefined priorities. This capability ensures that critical applications receive the resources they require, even during peak usage periods, thereby preventing resource starvation that could lead to system slowdowns or crashes.

Another significant characteristic of gWLM/WLM is its real-time monitoring and reporting capabilities. The software provides detailed insights into resource utilization, workload performance, and system health. Administrators can access this information through a user-friendly interface, allowing for informed decision-making and proactive management.

Integration with HP Serviceguard adds another layer of functionality, enabling high availability for critical applications. gWLM can orchestrate workload migration to ensure that service levels are maintained, even in the event of hardware failures or resource contention.

The technology behind gWLM/WLM is built on advanced algorithms that leverage historical data and predictive modeling to optimize resource allocation dynamically. This means that as workloads change, the system can automatically adjust resource distribution to meet performance targets without the need for constant manual intervention.

gWLM also supports integration with various enterprise management tools, enabling administrators to implement comprehensive monitoring and management strategies across the IT infrastructure. The scalability of gWLM allows organizations of all sizes to benefit from its robust workload management features, ensuring that they can adapt to changing demands in their operational environments.

In summary, HP-UX 11i Workload Management software offers a sophisticated solution for optimizing resource utilization, managing workloads effectively, and maintaining high performance in complex enterprise environments. Its comprehensive features and technologies make it an essential tool for any organization seeking to enhance their IT operations.
Top Page Image Contents