HP Cloud Network Manager Software Advanced configuration tasks, Disabling inter-user bridging

Page 34

The LED display is always in the Enabled mode during the anAP reboot.

Disabling inter-user bridging

If you have security and traffic management policies defined in upstream devices, you can disable bridging traffic between two clients connected to the same AP on the same VLAN. When inter-user bridging is denied, the clients can connect to the internet but cannot communicate with each other, and the bridging traffic between the clients is sent to the upstream device to make the forwarding decision.

To disable inter-user bridging:

1.Select Wireless Configuration > System. The Configuration-System details are displayed.

2.In GENERAL, set the DENY INTER USER BRIDGING to Enabled.

3.Click Save Settings.

Preventing local routing between clients

If you have security and traffic management policies defined in upstream devices, you can disable routing traffic between two clients connected to the same AP on different VLANs. When local routing is disabled, the clients can connect to the internet but cannot communicate with each other, and the routing traffic between the clients is sent to the upstream device to make the forwarding decision.

You can disable local routing through:

1.Select Wireless Configuration > System. The System details are displayed.

2.In GENERAL, set DENY LOCAL ROUTING to Enabled.

3.Click Save Settings.

Enabling dynamic CPU management

APs perform various functions such as wired and wireless client connectivity and traffic flows, wireless security, network management, and location tracking.If an AP is overloaded, prioritize the platform resources across different functions. Typically, the APs manage resources automatically in real time. However, under special circumstances, if dynamic resource management needs to be enforced or disabled altogether, the dynamic CPU management feature settings can be modified.

To configure dynamic CPU management:

1.Select Wireless Configuration > System. The System details are displayed.

2.In GENERAL, select any of the following options from DYNAMIC CPU UTILIZATION.

n Automatic — When selected, the CPU management is enabled or disabled automatically during run-time. This decision is based on real time load calculations taking into account all different functions that the CPU needs to perform. This is the default and recommended option.

n Always Disabled in all APs — When selected, this setting disables CPU management on all APs, typically for small networks. This setting protects user experience.

n Always Enabled in all APs — When selected, the client and network management functions are protected. This setting helps in large networks with high client density.

3.Click Save Settings.

Advanced configuration tasks

This section describes the procedures for configuring settings that are specific to an AP in the cluster.

Customizing AP parameters on page 35

HP Cloud Network Manager User Guide

Wireless configuration 34

Image 34
Contents HP Cloud Network Manager User Guide Document 5998-5742, edition 1 July AcknowledgmentsContents Wireless configuration Advanced configuration tasks Captive portal for guest access Reports Maintenance Related documents About this guideIntended audience ConventionsCloud Network Manager overview About Cloud Network ManagerSupported APs Cloud Network Manager UI Cloud Network Manager user interface Activating your Cloud Network Manager subscriptionsActivating your HP Cloud Network Manager account User interface Search Tabs Notifications Help Data paneSearch TabsHelp NotificationsData pane Support FeedbackOverview MonitoringData pane item Description Access points AP detailsSection Description ClientsRemote Console System pane Data pane itemEvent log Setting notification alerts Wireless network profiles Wireless configurationInitial AP configuration Importing existing configuration from APConfiguring Wlan settings Understanding wireless network profilesNetwork types Voice Guest DMO Channel Content FilteDisable Ssid UtilizationWithout Uplink MAX Clients Configuring Vlan settings for a Wlan Ssid profileCan be Used Local ProbeKEY Configuring security settings for a Wlan Ssid profileManagement KEY Management Termination AuthenticatioRoaming ServerConfiguring access rules for a Wlan Ssid profile Editing a Wlan Ssid profile General configuration tasksDeleting a Wlan Ssid profile Basic configuration tasks Modifying the AP nameConfiguring a preferred band Configuring VC IP addressConfiguring time zone Configuring an NTP serverConfiguring auto join mode Additional configuration tasksConfiguring VC Vlan Configuring LED displayPreventing local routing between clients Advanced configuration tasksDisabling inter-user bridging Enabling dynamic CPU managementConfiguring radio profiles manually for AP Configuring radio profiles for an APConfiguring Arrm assigned radio profiles for an AP Customizing AP parametersMode Description Configuring uplink Vlan for an APSelect Administrator assigned in 2.4 GHz and 5 GHz Band Obtaining IP addressAdvanced radio resource management Arrm overviewHP MotionAware Airtime fairness modeAP control Monitoring the network with Arrm Configuring Arrm on an APArrm metrics Calculating SLB ModeMotion Aware MA NeighborValid PowerCustomize ChannelsConfiguring radio settings for an AP Intrusion detection systemDetecting and classifying rogue APs OS fingerprintingOff Low Medium High Detection level Detection policyOff Low High Settings fieldProtection level Protection policy Understanding authentication methods AuthenticationContainment methods Wireless configuration External Radius server Supported authentication serversRadius server authentication with VSA Internal Radius serverAuthentication termination on AP Configuring authentication serversConfiguring an external server for authentication Retype Shared KEY TimeoutShared KEY Retry CountConfiguring dynamic Radius proxy parameters Click Save ServerConfiguring 802.1X authentication for a network profile Enabling dynamic Radius proxyConfiguring MAC authentication for a network profile Configuring MAC authentication with 802.1X authenticationConfiguring WISPr authentication Blacklisting clients manually Blacklisting clientsBlacklisting users dynamically Understanding captive portal Captive portal for guest accessConfiguring blacklist duration Session firewall based blacklistingWalled garden Configuring a Wlan Ssid for guest accessTypes of captive portal Select the Primary Usage as GuestMulticast Transmission Content FilteringInactivity Timeout Dynamic MulticastUplink MAX Clients Threshold Can be Used WithoutLocal Probe Request Configuring internal captive portal for guest network External captive portal profiles Configuring external captive portal for a guest networkSelect any one of the following types of authentication Creating a captive portal profileCaptive Portal URLUSE Https FailureSplash Configuring captive portal roles for an SsidRule Type TypeInternal Configuring walled garden accessExternal Configuring Dhcp scopes Dhcp configurationDisabling captive portal authentication Configuring local and local, L3 Dhcp scopesNET Mask VlanNetwork Excluded AddressConfiguring Dhcp server for client IP assignment ServicesConfiguring an AP for Rtls support Select Wireless Configuration Services RtlsBonjour support configuration Configuring OpenDNS credentialsBonjour support overview Bonjour support solution Bonjour support with Cloud Network ManagerBonjour support services Bonjour support featuresSelect Wireless Configuration Services Bonjour Support Integrating an AP with Palo Alto Networks firewall Configuring an AP for PAN integrationIntegration with Cloud Network Manager Configuring a Wi-Fi uplink profile Uplink configurationWi-Fi uplink Uplink interfacesConfiguring PPPoE uplink profile Ethernet uplinkSetting an uplink priority Uplink preferences and switchingEnforcing uplinks Mobility and client management Switching uplinks based on internet availabilityFrom PRE-EMPTION, select Enabled Layer-3 mobility overviewConfiguring L3-mobility Enterprise domain Configuring L3 mobility domainConfiguring enterprise domains Snmp and loggingSnmp parameters for AP Configuring SnmpConfiguring community string for Snmp Creating community strings for SNMPv1 and SNMPv2Configuring Snmp traps Configuring a syslog serverCreating community strings for SNMPv3 Select Wireless Configuration System Logging Configuring Tftp dump serverLogging level Description Reports Creating a reportDeleting a report Firmware MaintenanceSubscription keys Device management User managementAcronyms and abbreviations TerminologyAbbreviation Expansion Term GlossaryDefinition DST Term DefinitionEAP POE Through a wireless connection

Cloud Network Manager Software specifications

HP Cloud Network Manager is a robust software solution designed to simplify and enhance the management of network infrastructure in cloud environments. As organizations increasingly shift toward cloud computing, they require comprehensive tools to oversee complex network deployments. HP Cloud Network Manager rises to this challenge, offering a powerful suite of features aimed at optimizing performance, automating tasks, and ensuring reliable connectivity.

One of the main features of HP Cloud Network Manager is its intuitive dashboard, which provides users with real-time insights into network operations. This centralized interface allows administrators to monitor the status of various components, identify potential issues, and respond swiftly to anomalies. With advanced analytics capabilities, the software empowers users to make data-driven decisions that enhance network efficiency.

Another critical feature of this software is its automation capabilities. HP Cloud Network Manager simplifies routine network management tasks, such as configuration, provisioning, and software updates, allowing IT teams to focus on strategic initiatives rather than mundane maintenance. Automation reduces the risk of human error and accelerates deployment times, significantly increasing operational agility.

The software also supports multi-cloud environments, enabling organizations to manage their network resources across different cloud platforms seamlessly. This flexibility is essential for businesses that utilize various cloud providers and wish to maintain a unified network strategy. Coupled with its compatibility with open standards, HP Cloud Network Manager facilitates integration with existing IT ecosystems, ensuring a smooth transition to advanced cloud solutions.

Security is a top priority in today's digital landscape, and HP Cloud Network Manager includes integrated security features to protect network assets. It provides visibility into traffic patterns, helping to detect and mitigate potential threats before they become significant issues. Enhanced security protocols ensure that sensitive data remains protected during transit and at rest, aligning with compliance requirements.

Finally, HP Cloud Network Manager is built on cutting-edge technologies, including artificial intelligence and machine learning, which enable proactive network management. These technologies predict network behavior, assisting administrators in optimizing resources and anticipating potential challenges. As a result, organizations can achieve enhanced reliability and performance from their network infrastructure.

In summary, HP Cloud Network Manager is an essential tool for businesses looking to improve their cloud network management capabilities. With its powerful features, supportive technologies, and commitment to security, it stands out as a reliable solution for navigating the complexities of modern network environments.