HP Cloud Network Manager Software manual Multicast Transmission, Dynamic Multicast, Transmit Rates

Page 58

Data pane item

Description

MULTICAST TRANSMISSION

Select Enabled if you want the AP to select the optimal rate for sending

OPTIMIZATION

broadcast and multicast frames based on the lowest of unicast rates across all

 

associated clients. When this option is enabled, multicast traffic can be sent at

 

up to 24 Mbps. The default rate for sending frames for 2.4 GHz is 1 Mbps and

 

5.0 GHz is 6 Mbps. This option is disabled by default.

 

 

DYNAMIC MULTICAST

Select Enabled to allow AP to convert multicast streams into unicast streams

OPTIMIZATION

over the wireless link. Enabling Dynamic Multicast Optimization (DMO)

 

enhances the quality and reliability of streaming video, while preserving the

 

bandwidth available to the non-video clients.

 

 

DMO CHANNEL UTILIZATION

Specify a value to set a threshold for DMO channel utilization. With DMO, the

THRESHOLD

AP converts multicast streams into unicast streams as long as the channel

 

utilization does not exceed this threshold. The default value is 90% and the

 

maximum threshold value is 100%. When the threshold is reached or exceeds

 

the maximum value, the AP sends multicast traffic over the wireless link.

 

NOTE: When you enable DMO on multicast SSID profiles, enable the DMO

 

feature on all SSIDs configured in the same VLAN.

 

 

TRANSMIT RATES

Specify the following parameters:

 

• 2.4 GHz—If the 2.4 GHz band is configured on the AP, specify the minimum

 

and maximum transmission rate. The default value for minimum

 

transmission rate is 1 Mbps and maximum transmission rate is 54 Mbps.

 

• 5 GHz—If the 5 GHz band is configured on the AP, specify the minimum and

 

maximum transmission rate. The default value for minimum transmission

 

rate is 6 Mbps and maximum transmission rate is 54 Mbps.

 

 

BANDWIDTH LIMITS

Select any of the following to specify the bandwidth limit:

 

• AIRTIME—An aggregate amount of airtime that all clients in this network

 

can use for sending and receiving data. Specify the airtime percentage.

 

• EACH RADIO— An aggregate amount of throughput that each radio is

 

allowed to provide for the connected clients.

 

 

Wi-Fi MULTIMEDIA (WMM)

Configure the following options for Wi-Fi Multimedia (WMM) traffic

TRAFFIC MANAGEMENT

management. WMM supports voice, video, best effort, and background access

 

categories. You can allocate a higher bandwidth for voice and video traffic

 

than other types of traffic based on the network profile. Specify a percentage

 

value for the following parameters:

 

• BACKGROUND WMM SHARE — Allocates bandwidth for background

 

traffic such as file downloads or print jobs.

 

• BEST EFFORT WMM SHARE —Allocates bandwidth for best effort traffic

 

such as traffic from legacy devices, applications or devices that do not

 

support QoS.

 

• VIDEO WMM SHARE — Allocates bandwidth for video traffic generated

 

from video streaming.

 

• VOICE WMM SHARE — Allocates bandwidth for voice traffic generated

 

from the incoming and outgoing voice communication.

 

NOTE: In a non-WMM or hybrid environment, where some clients are not

 

WMM-capable, you can allocate higher values for BEST EFFORT WMM share

 

and VOICE WMM SHARE.

 

 

CONTENT FILTERING

Set to Enabled to route all DNS requests for the non-corporate domains to

 

OpenDNS on this network.

 

 

BAND

Select a value to specify the band at which the network transmits radio signals.

 

The default value is All.

 

 

INACTIVITY TIMEOUT

Specify a timeout interval. If a client session is inactive for the specified dur-

 

ation, the session expires and the users are required to log in again. The min-

 

 

HP Cloud Network Manager User Guide

Wireless configuration 58

Page 57 Page 59
Image 58
Page 57 Page 59
Contents HP Cloud Network Manager User Guide Document 5998-5742, edition 1 July AcknowledgmentsContents Wireless configuration Advanced configuration tasks Captive portal for guest access Reports Maintenance Related documents About this guideIntended audience ConventionsCloud Network Manager overview About Cloud Network ManagerSupported APs Cloud Network Manager UI Cloud Network Manager user interface Activating your Cloud Network Manager subscriptionsActivating your HP Cloud Network Manager account User interface Search Tabs Notifications Help Data paneSearch TabsHelp NotificationsData pane Support FeedbackOverview MonitoringData pane item Description Access points AP detailsSection Description ClientsRemote Console System pane Data pane itemEvent log Setting notification alerts Wireless network profiles Wireless configurationInitial AP configuration Importing existing configuration from APConfiguring Wlan settings Understanding wireless network profilesNetwork types Voice Guest DMO Channel Content FilteDisable Ssid UtilizationWithout Uplink MAX Clients Configuring Vlan settings for a Wlan Ssid profileCan be Used Local ProbeKEY Configuring security settings for a Wlan Ssid profileManagement KEY Management Termination AuthenticatioRoaming ServerConfiguring access rules for a Wlan Ssid profile Editing a Wlan Ssid profile General configuration tasksDeleting a Wlan Ssid profile Basic configuration tasks Modifying the AP nameConfiguring a preferred band Configuring VC IP addressConfiguring time zone Configuring an NTP serverConfiguring auto join mode Additional configuration tasksConfiguring VC Vlan Configuring LED displayPreventing local routing between clients Advanced configuration tasksDisabling inter-user bridging Enabling dynamic CPU managementConfiguring radio profiles manually for AP Configuring radio profiles for an APConfiguring Arrm assigned radio profiles for an AP Customizing AP parametersMode Description Configuring uplink Vlan for an APSelect Administrator assigned in 2.4 GHz and 5 GHz Band Obtaining IP addressAdvanced radio resource management Arrm overviewHP MotionAware Airtime fairness modeAP control Monitoring the network with Arrm Configuring Arrm on an APArrm metrics Calculating SLB ModeMotion Aware MA NeighborValid PowerCustomize ChannelsConfiguring radio settings for an AP Intrusion detection systemDetecting and classifying rogue APs OS fingerprintingOff Low Medium High Detection level Detection policyOff Low High Settings fieldProtection level Protection policy Understanding authentication methods AuthenticationContainment methods Wireless configuration External Radius server Supported authentication serversRadius server authentication with VSA Internal Radius serverAuthentication termination on AP Configuring authentication serversConfiguring an external server for authentication Retype Shared KEY TimeoutShared KEY Retry CountConfiguring dynamic Radius proxy parameters Click Save ServerConfiguring 802.1X authentication for a network profile Enabling dynamic Radius proxyConfiguring MAC authentication for a network profile Configuring MAC authentication with 802.1X authenticationConfiguring WISPr authentication Blacklisting clients manually Blacklisting clientsBlacklisting users dynamically Understanding captive portal Captive portal for guest accessConfiguring blacklist duration Session firewall based blacklistingWalled garden Configuring a Wlan Ssid for guest accessTypes of captive portal Select the Primary Usage as GuestMulticast Transmission Content FilteringInactivity Timeout Dynamic MulticastUplink MAX Clients Threshold Can be Used WithoutLocal Probe Request Configuring internal captive portal for guest network External captive portal profiles Configuring external captive portal for a guest networkSelect any one of the following types of authentication Creating a captive portal profileCaptive Portal URLUSE Https FailureSplash Configuring captive portal roles for an SsidRule Type TypeInternal Configuring walled garden accessExternal Configuring Dhcp scopes Dhcp configurationDisabling captive portal authentication Configuring local and local, L3 Dhcp scopesNET Mask VlanNetwork Excluded AddressConfiguring Dhcp server for client IP assignment ServicesConfiguring an AP for Rtls support Select Wireless Configuration Services RtlsBonjour support configuration Configuring OpenDNS credentialsBonjour support overview Bonjour support solution Bonjour support with Cloud Network ManagerBonjour support services Bonjour support featuresSelect Wireless Configuration Services Bonjour Support Integrating an AP with Palo Alto Networks firewall Configuring an AP for PAN integrationIntegration with Cloud Network Manager Configuring a Wi-Fi uplink profile Uplink configurationWi-Fi uplink Uplink interfacesConfiguring PPPoE uplink profile Ethernet uplinkSetting an uplink priority Uplink preferences and switchingEnforcing uplinks Mobility and client management Switching uplinks based on internet availabilityFrom PRE-EMPTION, select Enabled Layer-3 mobility overviewConfiguring L3-mobility Enterprise domain Configuring L3 mobility domainConfiguring enterprise domains Snmp and loggingSnmp parameters for AP Configuring SnmpConfiguring community string for Snmp Creating community strings for SNMPv1 and SNMPv2Configuring Snmp traps Configuring a syslog serverCreating community strings for SNMPv3 Select Wireless Configuration System Logging Configuring Tftp dump serverLogging level Description Reports Creating a reportDeleting a report Firmware MaintenanceSubscription keys Device management User managementAcronyms and abbreviations TerminologyAbbreviation Expansion Term GlossaryDefinition DST Term DefinitionEAP POE Through a wireless connection

Cloud Network Manager Software specifications

HP Cloud Network Manager is a robust software solution designed to simplify and enhance the management of network infrastructure in cloud environments. As organizations increasingly shift toward cloud computing, they require comprehensive tools to oversee complex network deployments. HP Cloud Network Manager rises to this challenge, offering a powerful suite of features aimed at optimizing performance, automating tasks, and ensuring reliable connectivity.

One of the main features of HP Cloud Network Manager is its intuitive dashboard, which provides users with real-time insights into network operations. This centralized interface allows administrators to monitor the status of various components, identify potential issues, and respond swiftly to anomalies. With advanced analytics capabilities, the software empowers users to make data-driven decisions that enhance network efficiency.

Another critical feature of this software is its automation capabilities. HP Cloud Network Manager simplifies routine network management tasks, such as configuration, provisioning, and software updates, allowing IT teams to focus on strategic initiatives rather than mundane maintenance. Automation reduces the risk of human error and accelerates deployment times, significantly increasing operational agility.

The software also supports multi-cloud environments, enabling organizations to manage their network resources across different cloud platforms seamlessly. This flexibility is essential for businesses that utilize various cloud providers and wish to maintain a unified network strategy. Coupled with its compatibility with open standards, HP Cloud Network Manager facilitates integration with existing IT ecosystems, ensuring a smooth transition to advanced cloud solutions.

Security is a top priority in today's digital landscape, and HP Cloud Network Manager includes integrated security features to protect network assets. It provides visibility into traffic patterns, helping to detect and mitigate potential threats before they become significant issues. Enhanced security protocols ensure that sensitive data remains protected during transit and at rest, aligning with compliance requirements.

Finally, HP Cloud Network Manager is built on cutting-edge technologies, including artificial intelligence and machine learning, which enable proactive network management. These technologies predict network behavior, assisting administrators in optimizing resources and anticipating potential challenges. As a result, organizations can achieve enhanced reliability and performance from their network infrastructure.

In summary, HP Cloud Network Manager is an essential tool for businesses looking to improve their cloud network management capabilities. With its powerful features, supportive technologies, and commitment to security, it stands out as a reliable solution for navigating the complexities of modern network environments.
Top Page Image Contents