HP Client Virtualization with VMware View and VMware ThinApp Obtaining a specific configuration

<MOD_DIR_CONFIG>

<DIR_AUTHENTICATION_ENABLED VALUE="N" /> <DIR_LOCAL_USER_ACCT VALUE="Y" /> <DIR_SERVER_ADDRESS VALUE=""/> <DIR_SERVER_PORT VALUE="25"/> <DIR_OBJECT_DN VALUE=" "/> <DIR_OBJECT_PASSWORD VALUE=""/> <DIR_USER_CONTEXT_1 VALUE=""/> <DIR_USER_CONTEXT_2 VALUE="_"/> <DIR_USER_CONTEXT_3 VALUE=""/> </MOD_DIR_CONFIG> <MOD_NETWORK_SETTINGS> <SPEED_AUTOSELECT VALUE="Y"/> <NIC_SPEED VALUE="100"/> <FULL_DUPLEX VALUE="Y"/>

<IP_ADDRESS VALUE="XX.XXX.XXX.XX"/>

<SUBNET_MASK VALUE="xxx.xxx.xxx.x"/> <GATEWAY_IP_ADDRESS VALUE="XX.XXX.XXX.X"/> <DNS_NAME VALUE="ILOD234KJ44D002"/> <PRIM_DNS_SERVER value="xx.xx.x.xxx"/> <DHCP_ENABLE VALUE="Y"/>

<DOMAIN_NAME VALUE="americas.cpqcorp.net"/> <DHCP_GATEWAY VALUE="Y"/> <DHCP_DNS_SERVER VALUE="Y"/> <DHCP_STATIC_ROUTE VALUE="Y"/> <DHCP_WINS_SERVER VALUE="Y"/> <REG_WINS_SERVER VALUE="Y"/> <PRIM_WINS_SERVER value="xx.xx.x.xxx"/>

<STATIC_ROUTE_1 DEST="0.0.0.0" GATEWAY="0.0.0.0"/> <STATIC_ROUTE_2 DEST="0.0.0.0" GATEWAY="0.0.0.0"/> <STATIC_ROUTE_3 DEST="0.0.0.0" GATEWAY="0.0.0.0"/> </MOD_NETWORK_SETTINGS>

<ADD_USER

USER_NAME="Administrator"

USER_LOGIN="Administrator" PASSWORD=""> </ADD_USER>

<ADD_USER

USER_NAME="Landy9"

USER_LOGIN="mandy9" PASSWORD=""> </ADD_USER> <RESET_RIB VALUE="Y"/> </HPONCFG>

For security reasons, the user passwords are not returned.

Obtaining a specific configuration

A specific configuration can be obtained using the appropriate XML input file. For example, here are the contents of a typical XML input file, get_global.xml:

<!-- Sample file for Get Global command --> <RIBCL VERSION="2.0">

<LOGIN USER_LOGIN="x" PASSWORD="x"> <RIB_INFO MODE="read"> <GET_GLOBAL_SETTINGS /> </RIB_INFO>

</LOGIN>

</RIBCL>

The XML commands are read from the input file get_global.xml and are processed by the device:

/opt/hp/tools # ./hponcfg -f get_global.xml -l log.txt > output.txt

HPONCFG utility 7