HP Recovery Manager Software for VMware vSphere manual Plug-in Registration

Table 1 Configuration Tab Fields (continued)

Group	Field	Description
	Secure service	HP 3PAR Management Plug-in and
		Recovery Manager Software for VMware
		vSphere uses a secure Web service (using
		SSL certificates) securing all interactions
		between the VMware components (vCenter
		Server and vSphere clients) and HP 3PAR
		Management Plug-in and Recovery
		Manager Software for VMware vSphere.
		The SSL certificate for HP 3PAR
		Management Plug-in and Recovery
		Manager Software for VMware vSphere
		(provided by HP 3PAR) must be installed.
Debug	Log folder	The trace file name. The default file name
		is <system drive>:\Program Files\
		3PAR\Plug-In for Vmware
		vSphere\Log.
	Debug level	Specifies the level of verbosity of the log
		file. The default value is Low.

2.Modify the fields as necessary.

3.Click Verify.

The operating environment is examined and, if no configuration errors are reported, a dialog appears indicating that the configuration has been completed successfully.

4.Click OK.

5.Click Save to save your changes.

Plug-in Registration

The Plug-in Registration option is used to register and unregister the HP 3PAR plug-in with the vCenter Server is shown in (Figure 18 (page 35)).

Figure 18 Plug-in Registration

NOTE: You must be an Administrator of the vCenter Server for plug-in registration.

The fields available from the Plug-in Registration tab are shown in Table 2 (page 36).

vCenter Plug-in Tab 35