HP Server tc2110 manual Chapter

Page 27

Chapter 4

Installing Microsoft Windows 2000 Server and Small Business Server 2000

5.Press C to continue Setup at the "Setup has determined that your computer's startup hard disk is new…" screen.

6.Press F8 to accept the licensing agreement.

7.At the drives partitioning screen, select the target drive. If you want to use the entire drive to install Windows 2000 then press Enter. Otherwise, press C to create a drive a partition.

In this example we will create a 2GB partition. Please note that Windows 2000 does not have the 2GB limitation present on NT 4.0.

a.Press C to create a partition.

b.At the "Create partition size" prompt, type 2048 and press Enter.

c.HP recommends that you create all the partitions needed for each hard drive present on your system. Select unpartitioned space and press C again to create additional partitions.

8.Select the target drive to be used to install Windows 2000. Press Enter.

9.Select "Format the partition using the NTFS file system" and press Enter.

10.The installer will format and copy files to the hard drive.

11.The system will reboot and launch Windows 2000 graphic interface. Be sure to remove the driver diskette before the reboot.

12.At the "Installation Wizard" first dialog box, click Next to continue.

13.The "Installing Devices" screen will be shown with a progress bar on the display. This may take 10 to 15 minutes.

14.You can now proceed through the customization of your installation using the graphical interface.

NOTE

The network settings may need to be customized to your

 

environment. Please refer to Microsoft 2000 manuals should

 

you need further details on the networking settings.

 

 

15.The "Installing Components Display" screen starts with a progress bar. It takes about 20 minutes to complete this section.

16.The wizard will then automatically start the "Performing Final Tasks" section to complete the installation. This step may takes a long time too, with the progress bar apparently not moving.

21

Image 27
Contents HP Server tc2110 Network Operating System Installation Guide Page Contents Run HP Diagtools optional Installing Red Hat Linux On-Line Information and Software Sources Introduction Installation HighlightsHP Server tc2110 Installation Highlights for Experts Hardware Setup Updating your Server BiosPreparing your Hard Disk Drives Run HP Diagtools Using the Startup CDPrepare the Installation High Level Process FlowCreate the Drivers Diskettes Perform Windows NT Installation Create Microsoft Windows NT Installation DiskettesPhase 2 Hard Drive Preparation Phase 1 Drivers InstallationPhase 3 System Configuration Details Phase 4 Configure the Network Phase 5 Completing the Installation How to get a copy of Windows NT 4.0 Service Packs Phase 6 Install the Service PackInitialize Hard disk Drive Phase 7 Install HP Video DriverAttach Clients to Network and Test Network Link Perform Hardware Status CheckTroubleshooting Install Additional HP AccessoriesTip #1. Troubleshooting Scsi Host Bus Adapter Configuration Tip #3. Service Pack Files Replaced Without Feedback Tip #5. Booting from Another Scsi HDD Tip #6. Restarting Windows NT installationOn-Line Information and Software Sources Page For ease of reading, we will refer to Windows 2000 Server Perform Windows 20000 Installation Chapter Phase 1 Install the Service Pack Completing the InstallationPhase 3 Install the HP Video Driver Phase 2 Install the Chipset DriverPhase 1 Perform Hardware Status Check Configure the SystemPhase 4 Install the HP LAN driver Phase 5 Install Windows 2000 Recovery ConsolePhase 2 Initialize Hard Disk Drive Phase 3- Adding Terminal Server Services Create Client Installation Diskettes Configure the Network Phase 1 -- Configure Server IP AddressPhase 2 -- Attach Clients to Network and Test Network Link Testing the connection using Terminal Services Phase 3 -- Domain Controller SetupInstall Additional HP Accessories Tip #1. Upgrading from NT 4.0 to Windows Tip #4. Windows 2000 Drivers Signatures Tip #3. Configure the Parallel LPT Port for ECP ModeRecovery option #1 Last known good configuration Tip #5. Windows 2000 Recovery Options\WINNT Online Information and Software Sources Tip #6. Restarting Windows 2000 installationPage Run HP Diagtools optional Phase 1 Start the Installation For NetWare \INSTALL Phase 2 Install HP DriversPhase 3 Configure the Network Install the Support Pack Install Additional HP Accessories Tip #1. Restarting NetWare Installation Create the Driver’s Diskettes Perform NetWare 6.0 or SBS 6.0 Installation For Both NetWare 6.0 and Small Business Suite Phase 2 Install HP Drivers Phase 3 Configure the Network Install Additional HP Accessories Troubleshooting Page Perform Red Hat Linux Installation Phase 1 Launch the InstallationPhase 2 Configure the Server Phase 3 Complete the Installation Install Additional HP Accessories Page Perform TurboLinux Installation Installing TurboLinux ServerInstalling TurboLinux Server On-Line Information and Software Sources
Related manuals
Manual 1 pages 3.34 Kb Manual 118 pages 14.01 Kb Manual 4 pages 49.92 Kb

Server tc2110 specifications

The HP Server tc2110 is a robust and versatile solution designed to meet the needs of small to medium-sized businesses looking for reliability and performance in their IT infrastructure. This server is built on the foundation of HP's renowned engineering, making it a trusted choice for organizations needing dependable server capabilities.

One of the standout features of the HP tc2110 is its scalability. With support for multiple processors, organizations can easily upgrade their server capabilities as their needs grow. This makes it an ideal choice for businesses that anticipate future expansion and require a server that can grow alongside them. The tc2110 supports various Intel Xeon processors, offering excellent processing power and efficiency.

Another significant characteristic of the tc2110 is its high capacity for memory. The server can support substantial RAM, which enhances its multitasking capabilities and allows it to handle demanding applications with ease. This memory capacity is complemented by the server's support for various storage options, including traditional hard drives and modern solid-state drives, enabling businesses to optimize performance and data access speeds according to their specific needs.

The HP Server tc2110 also emphasizes security features, which are critical for today’s evolving cybersecurity landscape. It includes advanced hardware security features such as Trusted Platform Module (TPM) and secure boot, ensuring that data is protected against unauthorized access and potential threats.

In addition to its impressive hardware capabilities, the tc2110 is designed with energy efficiency in mind. Its intelligent cooling technologies and power management features help reduce overall operational costs while maintaining optimal performance. This makes the server not only a powerful option but also a more environmentally friendly choice, aligning with the growing trend towards sustainable IT practices.

Connectivity is another key aspect of the HP tc2110. It offers multiple ports for network connections, ensuring seamless integration into existing IT infrastructures. This connectivity enhances communication between devices and provides businesses with the flexibility to adapt to new technology advancements with ease.

Overall, the HP Server tc2110 is a well-rounded server solution that combines performance, scalability, security, and energy efficiency. Whether for intensive applications, data management, or general computing tasks, the tc2110 stands out as a reliable choice for enterprises seeking to establish or enhance their IT environments. Its blend of features makes it a compelling option for organizations aiming to streamline operations while minimizing costs.