HP Server tc2110 manual Phase 3 Complete the Installation

Chapter 7 Installing Red Hat Linux 7.1

￿￿HP recommends selecting a Custom System installation type, because this mode includes the X Window graphical interface. ("Install Options" section)

￿￿HP recommends using the default partitioning mode: Automatically partition and REMOVE DATA ("Disk Partitioning" section)

NOTE	The network settings need to be customized to your
	environment. Please refer to Red Hat manuals should you need
	further details on the networking settings.

￿￿At the "Selecting Package Groups" Section, HP recommends selecting the X Window graphical interface package

NOTE	Remember to select an appropriate package group that matches
	your network settings (example: the "DNS Name Server"
	package may be required if you have set-up your new server to
	be the DNS controller).

￿￿Should you select to install a graphical interface, you will be prompted for your video hardware and monitor references ("X Configuration" section).

oRed Hat will detect your chip as an nVidia chip.

oYou can find HP monitors references on the back of your monitor.

oHP recommends selecting login type as "Graphical" ("Custom Configuration" section).

PHASE 3 – Complete the Installation

1.Upon completion of the customization, the installation program asks for confirmation before proceeding with the install. Click Next to proceed.

2.The installation may prompt for Red Hat Linux CD-ROM #2, depending on the packages you choose to install.

3.HP recommends that you create a boot diskette that will allow you to boot and manage your server when experiencing problems in loading your Red Hat environment.

4.Click Exit to exit the installation program. Remove the CD from the drive.

5.The system reboots and loads your new Red Hat environment.

54