HP SCSI manual Technical Specifications

QuickSpecs

HP ProLiant ML310 Generation 2

Technical Specifications

System Unit	Dimensions (HxWxD)	17.0 x 7-7/8 x 22 in (43.0 x 20.0 x 55.0 cm)
	Weight(approximate)	37 lb (16.8 kg)
	Input Requirements	Range Line Voltage	100-127V and 200-240V
	(per power supply)	Normal Line Voltage	115 to 230 VAC
	Line Frequency	50 to 60 Hz
	Rated Input Current	< 6A RMS at 90VAC with maximum load
	BTU Rating	1,560 BTU
	SCSI Connectors	One internal HD68 connectors
	(SCSI Models only)	NOTE: Support for either one internal or one external SCSI channel is
		available. This is achieved using an internal to external SCSI cable
		option kit (PN 159547-B22) and SCSI knockout bracket.
	Power Supply Output	Rated Steady-State	350W
	Power	Power
		Maximum Peak Power	370W
	Temperature Range	Operating	50° to 93° F (10° to 35° C)
		Shipping	-40° to 150° F (-40° to 66° C)
	Relative Humidity	Operating	20% to 80%
	(non-condensing)	Non-operating	5% to 90%
	Acoustic Noise	Idle
		(Fixed Disk Drives
		Spinning)
		L WAd (BELS)	5.7
		L pAm (dBA)	40
		Operating
		(Random Seeks to Fixed
		Disks)
		L WAd (BELS)	5.7
		L pAm (dBA)	40
Non-Hot Plug Wide	36.4 GB 15K	Capacity	36419.2 MB
Ultra320 SCSI Hard	357012-B21	Height	1 in (2.54 cm)
Drives		Width	4 in (10.16 cm)
		Interface	Ultra320 SCSI
		Transfer Rate	320 MB/s
		Synchronous
		(Maximum)
		Seek Time	Single Track	0.4 ms
		(typical reads, including
		settling)	Average	3.8 ms
			Full-Stroke	8 ms
			Rotational	15,000 rpm
		Physical Configuration Bytes/Sector		512
			Logical Blocks	71,132,000
		Operating Temperature50° to 95° F (10° to 35° C)

DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006 Page 31