HP SCSI manual Non-Hot Plug SATA/100 80 GB 7.2K Capacity, 48X Max IDE Atapi Disk, CD-ROM Drive

QuickSpecs

HP ProLiant ML310 Generation 2

Technical Specifications

Non-Hot Plug SATA/100	80 GB 7.2K	Capacity	80,000 MB
Hard Drives	383410-B21	Height	1.028 in/2.611cm
		Width	4.0 in/10.16 cm
		Interface	Serial ATA
		Transfer Rate	1.5 Gb/s
		Synchronous
		(Maximum)
		Seek Time	Single Track	0.9 ms
		(typical reads, including	Average	9.0 ms
		settling)	Full-Stroke	17.0 ms
			Rotational	7,200 rpm
		Physical Configuration Bytes/Sector		512
			Logical Blocks	156,301,488
		Operating Temperature41° to 131° F (5° to 55° C)
48X Max IDE (ATAPI)	Disk	Applicable Disk	CD-ROM, CD-XA, CD-DA (Mode 1, Mode 2,
CD-ROM Drive			Form 1 and 2)
			Photo CD (Single and Multi-session)
			Mixed Mode (Audio and Data combined)
			CD-R
		Capacity	540 MB (Mode 1, 12 cm)
			650 MB (Mode 2, 12 cm)
	Block Size	Mode 1	2,048 bytes
		Mode 2	2,340 bytes, 2,336 bytes
		CD-DA	2,352 bytes
		CD-XA	2,328 bytes
	Interface	IDE (ATAPI)
	Access Times (typical)	Random	<100 ms
		Full-Stroke	<150 ms
	Data Transfer Rate	Sustained	3000 to 7200 KB/s (20X to 48X)
		Burst	150 KBps to 7,200 KBps
		Bus Rate	16.7 MBps
	Cache Buffer	128 KB
	Start-up Time (typical)	< 7seconds
	Stop Time	< 4seconds
	Laser Parameters	Type	Semiconductor Laser GaA1As
		Wave Length	780 ± 25 nm
	Operating Conditions	Temperature	41° to 113° F (5° to 45° C)
		Humidity	10% to 80%
	Dimensions	(HxWxD, maximum)	1.7 x 5.85 x 8.11 in (4.29 x 14.86 x 20.60 cm)
		Weight	2.09 lb (0.95 kg)

DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006 Page 32