HP MSR93x Router manual Installing the router, Mounting the router on a workbench

Page 10

Figure 2 Installation flowchart

Mount the router on a

workbench

Check the workbench

Start
		Install the router on a wall


Install the router
Install the router


					Install wall-mounting screws


Ground the router
Ground the router



Install antennas



Connect interface cables



Connect the router to a console
terminal


Connect the power adapter



Verify the installation



Power on the router					Troubleshoot the router
Power on the router					Troubleshoot the router



Operate correctly ?					Power off the router
Operate correctly ?			No		Power off the router
	Yes




End

Installing the router

Mounting the router on a workbench

IMPORTANT:

•Ensure good ventilation and 10 cm (3.9 in) of clearance around the chassis for heat dissipation.

•Avoid placing heavy objects on the router.

To mount the router on a workbench:

1.Make sure the workbench is clean, stable, and correctly grounded.

2.Place the router upside down on the workbench and attach the rubber feet to the four round holes in the chassis bottom.

6

Image 10

Contents HP MSR 93X Routers Page Contents Page Safety recommendations Product code HP descriptionSite requirements ESD prevention Installation accessories Lightning protectionPre-installation checklist Requirements Yes NoInstallation prerequisites Installation flowchartInstalling the router Mounting the router on a workbenchInstalling the router on a wall Mounting the router on a workbenchGrounding the router Grounding the router with a grounding stripInstalling a standard 3G SIM card Grounding the router to a buried grounding conductorRemoving the 3G SIM card socket cover Installing a 3G antenna Installing the standard 3G SIM card3G extender cables Number Extender CableInstalling Wlan antennas Installing a standard 4G SIM cardRemoving the 4G SIM card socket cover Incorrect installation methods Installing a 4G antenna Installing a 3G/4G antenna extender cable to a 4G deviceInstalling a GPS antenna JG704A router antenna installation instructionsConnecting interface cables Number HP 4G extender cableConnecting the console cable and setting terminal parameters Setting console terminal parametersConnection description Setting the serial port parameters Connecting the power adapter Setting the terminal emulation parametersVerifying the installation Powering on the routerStartup process Power-on check DDR3 SdramConfiguring basic settings for the router No terminal display Power supply failureSystem configuration problems Garbled terminal displaySuper password loss Password lossUser password loss No response from the serial port3G/4G SIM card and 3G/4G antenna failures Restoring the factory settingsScenario Reset button usage guidelines Router crashesChassis views JG511AJG512A JH012AJG513A JG514A JG515AJG531A JG516A JG517AJG518A JG519A JH013AJG520A JG596A JG665AJG704A JG597A Technical specificationsJG511 JG512 JG513 JG514 JG515 JG531 JG516 JG517A JH01 JG511 JG512 JG513 JG514 JG515 JG531 JG516 JH01 JG517A JG518A JG519A JG520A JG597A JG596A JG665A JG704A JH013Specification Antenna specificationsJG519A JG518A JH013 JG520A JG597A JG596A JG665A JG704A Wlan antenna specifications Appendix B LEDs LEDsJH012A JG513A Serial port link status LED Link JG531A JG517A JG518A JH013A System status LED SYS JG665A JG704A LED description Location Status DescriptionRssi LED ACT Related information Subscription serviceContacting HP DocumentsConventions Convention DescriptionNetwork topology icons Index