If AC is Blocked by Storm Window

Add wood as shown in FIG. 14, or remove storm window before air conditioner is installed.

AIR CONDITIONER USE

Operating your air conditioner properly helps you to obtain the best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

FIG. 14

SASH

STORM WINDOW

FRAME

OR OTHER

OBSTRUCTION

BOARD THICKNESS AS REQUIRED, FOR PROPER PITCH TO REAR, ALONG ENTIRE SILL. FASTEN WITH NAILS OR SCREWS.

If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.

Do not try to operate your air conditioner in the cooling mode when outside temperature is below 65°F (18°C). The inside evaporator coil will freeze up, and the air conditioner will operate properly.

NOTE: In the event of a power failure, your air conditioner will operate at the previous settings when the power is restored.

If Storm Window Frame must remain, be sure the drain holes or slots are not caulked or painted shut.Accumulated Rain Water or Condensation must be allowed to drain out.

Removing AC From

Window

*Turn AC off, and disconnect power cord.

*Remove sash seal from between windows, and unscrew safety lock.

*Remove screws installed through frame and frame lock.

*Close (slide) side panels into frame.

*Keeping a firm grip on air conditioner, raise sash and carefully “rock” air conditioner backward to drain any condensate water in base of unit. Be careful not to spill any remaining water while lifting unit from window. Store parts WITH air conditioner.

SG-WAC-12ESE-C, SG-WAC-10ESE-C specifications

The Soleus Air SG-WAC-10ESE-C and SG-WAC-12ESE-C are cutting-edge window air conditioning units designed to provide effective cooling solutions for homes and offices. These models stand out in the crowded air conditioning market due to their blend of innovative features, energy efficiency, and user-friendly operation.

A hallmark of the SG-WAC-10ESE-C and SG-WAC-12ESE-C is their impressive cooling capacity. The SG-WAC-10ESE-C offers a cooling output of 10,000 BTU, making it ideal for spaces up to approximately 400 square feet. On the other hand, the SG-WAC-12ESE-C features a more powerful 12,000 BTU output, suitable for areas up to 550 square feet. This makes both units perfect for living rooms, bedrooms, or even small office spaces.

Energy efficiency is another key feature that sets these units apart. Both models are equipped with Energy Star ratings, ensuring they meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only helps users save on energy bills but also reduces their carbon footprint, making them environmentally friendly choices.

The units come with several operation modes, including cooling, dehumidifying, and fan modes. This versatility allows users to customize their comfort settings seasonally or according to specific needs. Additionally, the units are equipped with programmable timers and remote control options, allowing users to set their preferred operating schedules conveniently.

Installation is simplified with the included window mounting kits, making it easier for users to set them up without the need for professional assistance. The modern design of the units ensures they fit seamlessly into various home decors while providing powerful performance.

Another notable characteristic is the sound level; these units operate quietly, ensuring minimal disruption during use.

In terms of maintenance, the SG-WAC-10ESE-C and SG-WAC-12ESE-C boast easily removable and washable air filters, making it easy to maintain clean air quality in your indoor environment.

Overall, the Soleus Air SG-WAC-10ESE-C and SG-WAC-12ESE-C are exemplary choices for anyone looking for reliable and efficient cooling solutions. With a combination of robust performance, user-friendly features, and a focus on energy efficiency, these air conditioning units deliver a comfortable indoor climate all year round.