Soleus Air SG-WAC-10ESE-C, SG-WAC-12ESE-C Electrical Requirements, Recommended Ground Method

Page 4
ELECTRICAL REQUIREMENTS

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove the ground prong. Do not use an adapter

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock

Recommended Ground Method

The electrical ratings for your air conditioner are listed on the model and serial number label located on the front left side of the unit (when facing the front).

Specific electrical requirements are listed in the chart below. Follow the requirements below for the type of plug on the power supply cord.

Wiring Requirements

Power Supply Cord

 

 

 

 

115 volt (103.5 min.—126.5 max)

0-12 amps

15-amp time-delay fuse or circuit breaker

Use on single outlet circuit only

For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a 3 prong power supply cord with a grounded plug. To minimize the possibility of electrical shock, the cord must be plugged into a 3 prong outlet and grounded in accordance with all local codes and ordinances. If a 3 prong outlet is not available, it is the cus- tomer’s responsibility to have a properly grounded 3 prong outlet installed by a qualified electrician.

It is the customer’s responsibility:

Copies of the standards listed may be obtained from:

• To contact a qualified electrician

National Fire Protection Association

• To assure that the electrical installation is adequate

One Batterymarch Park

Quincy, Massachusetts 02269

and in conformance with the National Electrical Code,

ANSI/NFPA 70 - latest edition, and all local codes and

 

ordinances.

 

 

 

LCDI Power Cord and Plug

 

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord that is required by UL. This power supply cord contains state-of-the-art electronics that sense leakage current. If the cord is damaged and leakage occurs, power will be disconnected from the unit.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test the plug:

1.Plug power cord into a grounded 3 prong outlet

2.Press RESET (on some units a green light will turn on).

3.Press the TEST Button, the circuit should trip and cut all power to the air conditioner (on some units a green light may turn off.

4.Press the RESET button for use. You will hear a click and the A/C is not ready for use.

NOTES:

The RESET button must be engaged for proper use.

The power supply cord must be replaced if it fails to trip when the TEST button is pressed and the unit fails to reset.

Do not use the power supply cord as an ON/OFF switch. The power supply cord is designed as a protection device.

A damaged power supply cord must be replaced with a new power supply cord from Soleus Air Powered by Gree.

The power supply cord contains new user serviceable parts. Opening the tamper-resistant case voids all warranty and per- formance claims.

NOTE: Your units power cord and plug may differ from the one shown.

3

Image 4
Contents Models SG-WAC-10ESE-C SG-WAC-12ESE-C Electronic Window Air ConditionerOperating Instructions V.12101Page IMPORTANT SAFETY INSTRUCTIONS ELECTRICAL REQUIREMENTS LCDI Power Cord and PlugRecommended Ground Method It is the customer’s responsibilityPACKING LIST Packing ListSPECIFICATIONS DISCLAIMERModel SG-WAC-10ESE-CINSTALLATION & ASSEMBLY INSTRUCTIONS Mounting Hardware How to InstallTOOLS NEEDED FIG. 3AFIG. FIG FIG. FIG. 6AFIG. FIG AIR CONDITIONER USE If AC is Blocked by Storm WindowRemoving AC From Window Electronic Control Panel & Remote Control USING YOUR AIR CONDITIONERAir Conditioner Controls Normal Operating Sounds OPERATING YOUR AIR CONDITIONER REMOTE CONTROL9.LOCK/UNLOCK- Press the “+” and “-”buttons simultaneously to lock and unlock the remote control. When the remote is locked, none of the functions or setting can be changed using the remote REMOTE CONTROLOPERATING YOUR AIR CONDITIONER USING YOUR AIR CONDITIONER Cont Fan Only Mode Use Fan Only mode at LowCARE AND CLEANING Air Filter CleaningCabinet Cleaning Winter StorageTROUBLESHOOTING PROBLEMSOLUTIONS The Remote Control is not workingTROUBLESHOOTING CONT PROBLEMSOLUTIONS POSSIBLE CAUSESWarranty
Related manuals
Manual 17 pages 14.42 Kb

SG-WAC-12ESE-C, SG-WAC-10ESE-C specifications

The Soleus Air SG-WAC-10ESE-C and SG-WAC-12ESE-C are cutting-edge window air conditioning units designed to provide effective cooling solutions for homes and offices. These models stand out in the crowded air conditioning market due to their blend of innovative features, energy efficiency, and user-friendly operation.

A hallmark of the SG-WAC-10ESE-C and SG-WAC-12ESE-C is their impressive cooling capacity. The SG-WAC-10ESE-C offers a cooling output of 10,000 BTU, making it ideal for spaces up to approximately 400 square feet. On the other hand, the SG-WAC-12ESE-C features a more powerful 12,000 BTU output, suitable for areas up to 550 square feet. This makes both units perfect for living rooms, bedrooms, or even small office spaces.

Energy efficiency is another key feature that sets these units apart. Both models are equipped with Energy Star ratings, ensuring they meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only helps users save on energy bills but also reduces their carbon footprint, making them environmentally friendly choices.

The units come with several operation modes, including cooling, dehumidifying, and fan modes. This versatility allows users to customize their comfort settings seasonally or according to specific needs. Additionally, the units are equipped with programmable timers and remote control options, allowing users to set their preferred operating schedules conveniently.

Installation is simplified with the included window mounting kits, making it easier for users to set them up without the need for professional assistance. The modern design of the units ensures they fit seamlessly into various home decors while providing powerful performance.

Another notable characteristic is the sound level; these units operate quietly, ensuring minimal disruption during use.

In terms of maintenance, the SG-WAC-10ESE-C and SG-WAC-12ESE-C boast easily removable and washable air filters, making it easy to maintain clean air quality in your indoor environment.

Overall, the Soleus Air SG-WAC-10ESE-C and SG-WAC-12ESE-C are exemplary choices for anyone looking for reliable and efficient cooling solutions. With a combination of robust performance, user-friendly features, and a focus on energy efficiency, these air conditioning units deliver a comfortable indoor climate all year round.