Copyright Information

© 2003 Hewlett-Packard Company

Part number Q2488-90901 Edition 1, 1/2003 Printed in USA

Warranty

The information contained in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with respect to this information.

HEWLETT-PACKARD SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Hewlett-Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information.

NOTICE TO U.S. GOVERNMENT USERS: RESTRICTED RIGHTS COMMERCIAL COMPUTER SOFTWARE: “Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) (1)(ii) of the Rights in Technical Data Clause at DFARS 52.227-7013.”

Trademark Credits

Adobe®, Acrobat®, PostScript™, and the Acrobat logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries/regions.

Netscape™ and Netscape Navigator™ are U.S. trademarks of Netscape Communications Corporation.

Microsoft®, Windows®, Windows NT®, and MS-DOS® are U.S. registered trademarks of Microsoft Corporation.

TrueType™ is a U.S. trademark of Apple Computer, Inc.

UNIX® is a registered trademark of The Open Group.

ENERGY STAR® is a U.S. registered service mark of the U.S. Environmental Protection Agency.

Safety Information

WARNING!

Potential Shock Hazard

Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock.

1.Read and understand all instructions in the user guide.

2.Observe all warnings and instructions marked on the product.

3.Use only a grounded electrical outlet when connecting

HP LaserJet 1500/

2500 series printers to a power source. If you do not know whether the outlet is grounded, check with a qualified electrician.

4.Do not touch the contacts on the end of any of the sockets on

HP LaserJet 1500/

2500 series printers. Replace damaged cords immediately.

5.Unplug this product from wall outlets before cleaning.

6.Do not install or use this product near water or when you are wet.

7.Install the product securely on a stable surface.

8.Install the product in a protected location where no one can step on or trip over the power cord and where the power cord will not be damaged.

9.If the product does not operate normally, see the online user guide.

10.Refer all servicing questions to qualified personnel.

Information regarding FCC Class B, Parts 15 and 68 requirements can be found in the user guide.

Hewlett-Packard Company

11311 Chinden Boulevard

Boise, Idaho 83714 U.S.A.