HP M1319 Collate my copy job, Change the copy-collation setting for, Current job, Def Collation

Page 2

Collate my copy job

How do I?

Steps to perform

1Press Set-upthen select Copy setup.

Change the copy-collation setting for the	Copy setup
current job

2Use the arrow buttons to select Def Collation.

3Select the number of copies.

4Press Start Copy to save the selection and

immediately start the copy job.

-or-

5Press OK to save the selection without starting the

job.

Image 2

Contents Document feeder ADF Copy using the automatic document feeder ADFLoad originals using the automatic Document loadedCurrent job Change the copy-collation setting forCollate my copy job Def CollationDocument Copy on both sides DuplexCopy a two-sided original to a one-sided Copying a two-sided original to a two-sided DocumentCopying a two-sided original to a two-sided document Copy on preprinted letterhead or forms Change the default media-size settingPaper setup Def. paper sizeChange the default media-type setting System setupPaper setup Def. paper typeAdjust the copy quality for the current job Make my copy look betterReduce or enlarge the image Adjust the default copy sizeCopy setup Reduce or enlarge copies for the current jobDef. Redu/Enlrg Media sizes and types Change the default media-size settingCopy on media of different sizes and types Use the arrow buttons to select Paper setup, and then press Paper setup Def. paper sizeSystem setup Paper setup Def. paper type