HP M1319 manual Change the default media-type setting, System setup

Page 7

How do I?	Steps to perform
Change the default media-size setting	5 Use the arrow buttons to select a media size, and then
(continued)	press OK.	Letter
(continued)		Letter

6Press OK to save the selection.

Change the default media-type setting

1On the product control panel, press Setup.

2Use the arrow buttons to select System setup, and then

press OK.	System setup

Image 7

Contents Document loaded Copy using the automatic document feeder ADFLoad originals using the automatic Document feeder ADFDef Collation Change the copy-collation setting forCollate my copy job Current jobCopy a two-sided original to a one-sided Copy on both sides DuplexDocument Document Copying a two-sided original to a two-sidedCopying a two-sided original to a two-sided document Def. paper size Change the default media-size settingPaper setup Copy on preprinted letterhead or formsSystem setup Change the default media-type settingDef. paper type Paper setupMake my copy look better Adjust the copy quality for the current jobReduce or enlarge copies for the current job Adjust the default copy sizeCopy setup Reduce or enlarge the imageDef. Redu/Enlrg Copy on media of different sizes and types Change the default media-size settingMedia sizes and types Paper setup Def. paper size Use the arrow buttons to select Paper setup, and then pressSystem setup Paper setup Def. paper type