Soleus Air GM-WAC-25ESE-C THRU-THE-WALL Installation, Installing the Chassis into the Cabinet

Page 12

ASSEMBLY & INSTALLATION (CONT.)

Installing the Chassis into the Cabinet

1.Team lift (two people) the air conditioner chassis and carefully slide it into the cabinet. Let the front of the air conditioner hang out approximately 6”.

2.CAUTION: DO NOT PUSH ON THE CONTROLS OR FINNED COILS.

3.Be sure the chassis is firmly seated in the back of the cabinet.

4.Insert all screws removed during window installation and reattach the front face plate, front panel, and the air filter. Use the REMOVE CHASSIS instructions and figures 1-6 for reference.

THRU-THE-WALL INSTALLATION

NOTE: Consult local building codes prior to installation and/or a qualified carpenter.

Select the Wall Location

This air conditioner has a slide-out chassis, so that it can be installed through an outside wall as specified below:

MAX WALL THICKNESS: 8 1/4”

IMPORTANT: The side louvers must never be blocked.

NOTE: All parts needed for Thru-The-Wall Installation are provided, except a wood frame, shims, and 10 wood screws (10-1” long minimum). Select a wall surface that:

1.Does not support major structural loads such as the frame construction at ends of windows, and under truss-bearing points, etc.

2.Does not have plumbing or wiring inside.

3.Is near existing electrical outlets, or where another out- let can or will be installed.

4.Does not have objects blocking the air vents which limits cooling.

5.Allows unblocked airflow from the rear and sides of the air conditioner.

Prepare the Wall

1.Prepare the wall in frame construction (including brick and stucco veneer). Working from inside the room, find the wall stud that is nearest the center of the installa- tion area.

2.Cut a hole on each side of the center stud.

3.Measure between the inside edges of every other stud as shown below.

FIG. 1

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents GM-WAC-25ESE-C Page Important Safety Instructions Lcdi Power Cord and Plug Electrical RequirementsRecommended Ground Method Parts List Tools NeededSpecifications DisclaimerModel Installation & Assembly Instructions Prior to Installing the Air ConditionerWindow Preparation Storm Window RequirementsInstallation & Assembly Instructions Window Mounting Remove ChassisInstallation & Assembly Instructions Window Mounting Assembly & Installation Top Angle Rail and Side Bracket InstallationTOP View Placing the Cabinet Inside the WindowInstall Support Brackets Install the Window Lock and Sash SealExtend the Accordion Panels MarkTHRU-THE-WALL Installation Installing the Chassis into the CabinetSelect the Wall Location Prepare the WallAssembly & Installation THRU-THE-WALL Prepare and Install the CabinetMasonry Construction Support Bracket Wooden StripUsing Your AIR Conditioner Electronic Control Panel & Remote ControlAir Conditioner Controls Normal Operating Sounds Remote Control Operating Your AIR ConditionerOperating Your AIR Conditioner Using Your AIR Conditioner Care and Cleaning Air Filter CleaningCabinet Cleaning Winter StorageTroubleshooting Problem Possible Causes SolutionsWater is dripping outside Water is dripping inside the roomWater collects in the base pan Warranty Page 66129908034

GM-WAC-25ESE-C specifications

The Soleus Air GM-WAC-25ESE-C represents a significant advancement in window air conditioning technology, designed to provide efficient cooling in a variety of spaces. With a focus on energy efficiency and user-friendly features, this unit is a popular choice for residential and commercial applications alike.

One of the standout features of the GM-WAC-25ESE-C is its impressive cooling capacity. With a powerful 25,000 BTU rating, it effectively cools areas of up to 1,500 square feet, making it ideal for larger rooms or open floor plans. This high capacity is complemented by a range of fan speeds, allowing users to customize their cooling experience based on their needs.

Energy efficiency is a key characteristic of this model, boasting an Energy Efficiency Ratio (EER) that meets or exceeds industry standards. This enables users to enjoy a comfortable environment without incurring exorbitant electricity bills. The unit is also equipped with an Energy Saver mode, which automatically adjusts the cooling output to maintain the desired temperature while conserving energy.

Another technological feature of the Soleus Air GM-WAC-25ESE-C is its user-friendly remote control. This allows for easy adjustments from anywhere in the room, adding to the convenience of the unit. The air conditioner also includes a programmable timer, giving users the flexibility to set operation times that fit their schedules, further enhancing energy efficiency.

The dual motor design of the GM-WAC-25ESE-C offers improved airflow and more consistent cooling. This technology helps reduce temperature fluctuations, ensuring a more stable and comfortable indoor climate. Additionally, the unit features multiple modes, including dehumidification and fan-only modes, providing versatility for different weather conditions.

Installation is made simple with the included window kit, allowing for a straightforward setup process. The unit is also designed with a washable air filter, which not only helps maintain air quality but also extends the lifespan of the unit. Regular maintenance is made easy, contributing to its overall longevity.

In conclusion, the Soleus Air GM-WAC-25ESE-C stands out as a powerful, energy-efficient window air conditioner that combines advanced technologies with user-friendly features. It's an excellent choice for anyone looking to cool larger spaces while keeping energy use and costs to a minimum.
Top Page Image Contents