Soleus Air GM-WAC-25ESE-C manual Masonry Construction, Support Bracket Wooden Strip

Page 14

ASSEMBLY & INSTALLATION - THRU-THE-WALL (CONT.)

Refer to the SUPPORT BRACKET ASSEMBLY in the WINDOW MOUNTING section to assemble the support brackets. A wooden strip nailed to the outside wall should be used in conjunction with the angled sill support brack- ets.

FIG. 3

Support

Bracket

Wooden Strip

5.Screw or nail the cabinet to the wooden frame using shims if the frame is oversized, to eliminate possible noise. Remember to maintain proper slope for water elimination.

FIG. 4

MASONRY CONSTRUCTION

1.Cut or build a wall opening in the masonry wall similar to the frame construction (refer to the THRU-THE- WALL installation for a wall thickness greater than 8 1/2”)..

2.Secure the cabinet in place using masonry nails, or masonry anchor screws. Or, build a frame using the instructions found in the THRU-THE-WALL installation section.

3.Make sure the masonry above the cabinet is supported well. Use the existing holes in the cabinet or additional drilled holes to fasten the cabinet at various positions.

Make sure that the side louvers are clear of any ob- structions.

4.Install the exterior cabinet support brackets according to the SUPPORT BRACKET INSTALLATION instruc- tions in the THRU-THE-WALL installation section.

Caulk or flash with aluminum if needed. This will pro- vide a tight seal around the top and sides of the cabi- net.

5.For a more aesthetically pleasing installation, apply wood trim molding around the sides of the cabinet with- out obstructing the side louvers.

6.Install the chassis into the cabinet by following the steps described in the WINDOW MOUNTING section.

OPTIONAL: Caulking and installation of the trim on the interior wall may be done if desired. Caulk the openings around the top and sides of the cabinet and all sides of the wood sleeve to the opening.

NOTE: See the WINDOW MOUNTING instructions for the bottom rail seal location.

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents GM-WAC-25ESE-C Page Important Safety Instructions Recommended Ground Method Lcdi Power Cord and PlugElectrical Requirements Parts List Tools NeededModel SpecificationsDisclaimer Window Preparation Installation & Assembly InstructionsPrior to Installing the Air Conditioner Storm Window RequirementsInstallation & Assembly Instructions Window Mounting Remove ChassisInstallation & Assembly Instructions Window Mounting TOP View Assembly & InstallationTop Angle Rail and Side Bracket Installation Placing the Cabinet Inside the WindowExtend the Accordion Panels Install Support BracketsInstall the Window Lock and Sash Seal MarkSelect the Wall Location THRU-THE-WALL InstallationInstalling the Chassis into the Cabinet Prepare the WallAssembly & Installation THRU-THE-WALL Prepare and Install the CabinetMasonry Construction Support Bracket Wooden StripAir Conditioner Controls Normal Operating Sounds Using Your AIR ConditionerElectronic Control Panel & Remote Control Remote Control Operating Your AIR ConditionerOperating Your AIR Conditioner Using Your AIR Conditioner Cabinet Cleaning Care and CleaningAir Filter Cleaning Winter StorageTroubleshooting Problem Possible Causes SolutionsWater collects in the base pan Water is dripping outsideWater is dripping inside the room Warranty Page 66129908034

GM-WAC-25ESE-C specifications

The Soleus Air GM-WAC-25ESE-C represents a significant advancement in window air conditioning technology, designed to provide efficient cooling in a variety of spaces. With a focus on energy efficiency and user-friendly features, this unit is a popular choice for residential and commercial applications alike.

One of the standout features of the GM-WAC-25ESE-C is its impressive cooling capacity. With a powerful 25,000 BTU rating, it effectively cools areas of up to 1,500 square feet, making it ideal for larger rooms or open floor plans. This high capacity is complemented by a range of fan speeds, allowing users to customize their cooling experience based on their needs.

Energy efficiency is a key characteristic of this model, boasting an Energy Efficiency Ratio (EER) that meets or exceeds industry standards. This enables users to enjoy a comfortable environment without incurring exorbitant electricity bills. The unit is also equipped with an Energy Saver mode, which automatically adjusts the cooling output to maintain the desired temperature while conserving energy.

Another technological feature of the Soleus Air GM-WAC-25ESE-C is its user-friendly remote control. This allows for easy adjustments from anywhere in the room, adding to the convenience of the unit. The air conditioner also includes a programmable timer, giving users the flexibility to set operation times that fit their schedules, further enhancing energy efficiency.

The dual motor design of the GM-WAC-25ESE-C offers improved airflow and more consistent cooling. This technology helps reduce temperature fluctuations, ensuring a more stable and comfortable indoor climate. Additionally, the unit features multiple modes, including dehumidification and fan-only modes, providing versatility for different weather conditions.

Installation is made simple with the included window kit, allowing for a straightforward setup process. The unit is also designed with a washable air filter, which not only helps maintain air quality but also extends the lifespan of the unit. Regular maintenance is made easy, contributing to its overall longevity.

In conclusion, the Soleus Air GM-WAC-25ESE-C stands out as a powerful, energy-efficient window air conditioner that combines advanced technologies with user-friendly features. It's an excellent choice for anyone looking to cool larger spaces while keeping energy use and costs to a minimum.
Top Page Image Contents