HP 4650 manual Installation, Remove Transportation Inserts

INSTALLATION

Warning:

TowerFeed may weigh up to 60 kilograms (130 pounds) depending on configuration. To prevent back strain or injury, enlist the help of someone and bend your knees when lifting the unit.

Warning:

POWER OFF your printer and TowerFeed and disconnect all power and interface cables before you proceed with the installation.

Hardware Installation

Remove Transportation Inserts

• Pull out, lift upwards and remove the trays from TowerFeed so as to remove the transportation inserts (Fig. 7). There are two at each side (keep the inserts for reshipment).

Note: The top tray is a turn round tray and does therefore not store any paper

•Re-insert and close the trays.

Fig. 7 Removing Transportation Inserts

Note:

Located on the right side of each tray you will find coding pins for the paper size. They are set by the factory and must not be changed.

IU 688 / 0402 6 TowerFeedTM for the HP color LaserJet 4650