Unpacking the TowerFeed unit

UNPACKING

Note:

Prior to delivery your TowerFeed was thoroughly tested and care-fully packaged. Please check your unit for transportation damage and/or missing parts immediately upon receipt.

It is advisable to get a second person to help you unpack the unit.

Warning:

TowerFeed weighs up to 60 kilograms (130 pounds) depending on configuration. Enlist the help of a second person to lift and place the printer. To prevent back strain or injury, bend your knees when lifting the unit.

•Cut the packing strips and remove the top of the shipping container.

•Remove the two blue shock absorbers and the accessories box from the top of the unit (Fig. 3).

•If TowerFeed is delivered with the optional stand for the 4-tray unit, remove the stand that is packed in front of TowerFeed (Fig. 4).

•Enlist the help of another person and carefully lift TowerFeed out of the container (Fig. 4).

•Remove the stretched plastic from TowerFeed. Be careful to not scratch the unit when using a cutting tool.

•Insert the 4 rollers (from the accessories box) with some force onto the roller shafts of TowerFeed. They will snap into position with a noticeable click. Insert the 2 stoppable rollers on the front side and the 2 non-stoppable ones on the back side of the unit (Fig. 6).

Note:

When turning TowerFeed over on a side or its back, be careful to not scratch its housing. Use a piece of cardboard or the like to prevent the unit from scratches.

•Remove the transportation inserts in the TowerFeed trays (as de- scribed in INSTALLATION)

Important:

It is recommended to keep the packaging material and inserts for proper protection of the unit and its parts in case of reshipment.

IU 688 / 0402	5	TowerFeedTM for the HP color LaserJet 4650