SECTION 5
TROUBLE SHOOTING
Section 5 – Trouble Shooting Guide
The following trouble shooting guides are provided to assist you in solving any problems that might occur with the ASTROJET 2600P/2800P Printer or its software. We have tried to make them as complete as possible. The best advice we can offer is to make sure that the system is setup properly, plugged in, that it has an adequate supply of ink before attempting to trouble shoot any problem.
HP Inkjet Print Cartridges
| CONDITION |
| PROBLEM | SOLUTION |
Black streaks in text |
| Lint or paper dust on printhead. | Clean the cartridge nozzles with | |
|
|
|
| a clean |
|
|
|
| with distilled water. |
|
|
|
|
|
| Cartridge will not print |
| Sheet is blank even after it has | Check to make sure the tape is |
|
|
| gone underneath cartridge(s). | off the printhead. |
|
|
|
| Remove and reinsert the |
|
|
|
| cartridge into the carriage |
|
|
|
| holder. |
|
|
|
| Install a new print cartridge. |
White streaks in text | or | Lint or dust blocking printhead | Clean the cartridge nozzles with | |
graphics |
| holes. | a clean | |
|
|
| Poor contact between printhead | with distilled water. |
|
|
| and printhead holder. | Clean interconnects. |
|
|
|
| Remove and reinsert the |
|
|
|
| cartridge into the holder. |
|
|
|
| Insert a new Print Cartridge. |
23