Front Panel Indication (OKIPAGE 8p)
As well as error indication on the host PC, the OKIPAGE 8p has a set of LEDs that inform the user of certain conditions.
Each of the LEDs can be in any one of five states:
RO N
lOFF
©Blinking (slow) repeats – ON(2secs)/OFF(2secs)
« Blinking repeats – ON(500ms)/OFF(500ms)
-Blinking (fast) repeats – ON(120ms)/OFF(120ms)
The front panel switch has different functions, depending on the condition of the front panel LEDs and also on the length of time that the button is pressed. There are three different modes of operation:
‹button pressed and released immediately.
•button pressed for more than 2 seconds (but less than 5 seconds).
•button pressed for more than 5 seconds.
LED Indication |
| Manual feed |
|
|
State | Error | Ready | Comments | |
|
|
| ||
Ready | l | l | R | — |
Cancelling data process | l | l | © | Buffer contents – • cleared |
(data remains in the buffer) |
|
|
| • printed |
Recieving, processing or | l | l | « | — |
printing data |
|
|
|
|
Manual request | l | « | l | — |
Change drum, toner low | © | – | – | — |
or toner sensor warning |
|
|
|
|
Buffer overflow or Print | « | l | l | Recover – ‹ |
overrun (ERROR) |
|
|
|
|
Paper out or Input | « | l | l | Recover and print |
jam (ERROR) |
|
|
|
|
Paper jam (size check, | « | l | l | print |
feed jam, exit jam) |
|
|
|
|
Error Cover open | « | l | l | — |
Program error (watchdog « | « | « | Recover by power off/on | |
timer or controller error) |
|
|
|
|
Hardware error | - | - | - | Service call if no recovery made after |
(FATAL ERROR) |
|
|
| power off/on |
Reseting printer | l | l | « | — |
Initializing | Rðl Rðl Rðl | — | ||
EEPROM initializing | «ðl «ðl «ðR | — | ||
English
User’s Guide | 15 |