Hardware Problems contd.
Problem | Solution |
|
|
Printed paper curls excessively. | Heat from the toner fusing process removes moisture from the paper and may cause curling. |
| If the curling is severe... |
| a Turn the paper over in the paper feeder. Put paper in feeder with print facing the back of the |
| printer, look on the package for an arrow or other indicator of the print side. |
| b A major cause of curl is improper storage. Store paper in a dry place, lying flat. Do not open the |
| paper package until you are ready to use the paper. |
| c Try to protect your paper from excessive temperatures and rapid temperature changes. |
|
|
Printer seems too hot. | The toner fusing process in your printer generates a gignificant amount of heat, and the top cover |
| may feel quite warm. This is perfectly normal. If the top cover becomes too hot to touch, switch |
| the printer off and call your dealer for advice. |
|
|
Printed paper emerges wrinkled. | Use the printer control panel to change the paper thickness setting to light. |
|
|
22 | OKIPAGE 8p/8w |