HP 6221 manual Charging a spare battery

Icon Description

The USB cable to use for connecting to a computer or PictBridge port of a printer is part number C8887-80003 (or 8121-0637), and it came in the box with the dock.

5V 2A The AC power adapter for the dock is the same as the one used for your camera (part number L2056–60001). If no power adapter came with your dock, use the one that came with your camera.

Use this port and the audio/video cable with the part number C6324-61601 to connect the dock to a TV, VCR, or DVD player. The yellow plug connects to the video input and the red plug connects to the audio input.

3.Remove any cables that may be attached to your camera. Then, insert the camera into the camera dock as shown here. The Image Display side of the camera must point toward the edge of the dock with the HP logo.

Charging a spare battery

Caution Read Battery safety precautions carefully before recharging batteries.

Your dock will charge either an HP R07 Lithium Ion battery or 2 AA NiMH batteries.

1.Push down the latch and open the dock recharging bay door.

2.Insert the rechargeable battery or batteries into the dock recharging bay.

Insert the Lithium Ion battery with the arrow on top of the battery facing up and pointing toward the dock.

Observe the icons molded into the door and be certain to insert the NiMH batteries in the correct orientation as shown in the picture.

User Guide 3