HP RP3 3100 manual

10.If an expansion card was removed from the old riser card or you are installing a new expansion card into the riser card, install the card into the appropriate slot on the new riser card. Move the card toward the rear of the chassis so that the bracket on the card is aligned with the open slot on the rear of the chassis (1). Press the card straight down into the expansion socket on the riser card (2).

Figure 2-24Installing an Expansion Card in the Riser Card

11.If an expansion card was removed from the old riser card and you are not replacing the expansion card, install a slot cover in the expansion slot.

CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of internal components during operation.

Figure 2-25Installing an Expansion Slot Cover

Replacing the Riser Card 23