QuickSpecs
HP xw9400 Workstation
Technical Specifications - Hard Drive Controllers
Integrated LSI SAS 1068E | PCI Bus | ||
Controller with RAID 0, 1, PCI Modes | Bus Master DMA | ||
1E/10E | RAID Levels | RAID 0, 1, 1E and 10E | |
| |||
| PCI Data Burst Transfer | 8 | |
| Rate | 5.0Gbps for each full duplex lane. Total aggregate bandwidth of up to | |
|
| 4GBps possible. | |
| Full Duplex | LSI's SAS1068E | |
|
| port data transfer rates. | |
| PCI Card Type | N/A | |
| PCI Voltage | N/A | |
| PCI Power | N/A | |
| Bracket | N/A | |
| Certification Level | ||
| IO Bus | Eight 3Gb/s SAS/SATA ports | |
| SAS Processor | LSISAS1068E | |
| Internal Connectors | Four- SATA x1 connectors | |
| External Connectors | None | |
| Maximum Number of | 32 | |
| SCSI Devices |
| |
| LED Indicators | ||
| Integrated Mirroring | Integrated Mirroring option available | |
|
|
| |
LSI MegaRAID® SAS | PCI Bus | ||
8888ELP Host Bus | PCI Modes | Bus Master DMA | |
Adapter (HBA) | |||
RAID Levels | RAID 0, 1, and 5 | ||
| |||
|
| RAID spans 10 and 50 | |
| PCI Data Burst Transfer | Up to 3Gb/s per port | |
| Rate |
| |
| Full Duplex | Up to 1.5 GB/s | |
| PCI Voltage | +3.3V | |
| PCI Power | 7.5 Watts | |
| Certification Level | ||
| IO Bus | Eight 3Gb/s SAS/SATA ports | |
| Internal Connectors | Two SAS SFF8087 x4 | |
| External Connectors | Two SAS SFF8088 x4 | |
| Maximum Number of | 32 | |
| SCSI DeviceS |
| |
| LED Indicators | Connector LEDs indicate whether the internal or external connector is active | |
|
| for ports |
Worldwide — Version 27 — May 8, 2009 | Page 40 |