QuickSpecs
HP xw6400 Workstation
Technical Specifications
SATA Connectors | 4 ports/connectors |
| |
IEEE 1394a or 1394b | No integrated 1394a or 1394b – optional PCI card required. | ||
| Cable from Front IO can be plugged into PCI Card. | ||
| Not supported in Linux |
| |
USB 2.0 Connectors | 8 (5 rear, 2 on header for front, 1 internal) | ||
Power Supply Headers | Yes |
| |
Power Switch, Power LED | Yes |
| |
& Hard Drive LED Header |
|
|
|
Password Clear Header | Yes |
| |
|
|
|
|
|
|
|
|
Cooling Solutions |
|
|
|
Power Supply Fan | 92x25 mm variable speed |
| |
Processor Heatsink Fan(s) | 80x15 mm |
| |
Rear Chassis Fan(s) | Two 92x32 mm |
| |
|
|
|
|
Power Supply |
|
|
|
Power Supply | 575 Watt | ||
Operating Voltage Range | 90 – 269 VAC |
| |
Rated Voltage Range | 100 – 240 VAC |
| 118 VAC |
Rated Line Frequency | 50/60Hz |
| 400Hz |
Operating Line Frequency |
| ||
Range |
|
|
|
Rated Input Current | 10 A @ |
| 9.7 @ 118 VAC |
| 6 A @ |
|
|
Heat Dissipation | Typical 980 btu/hr (247 |
| |
(configuration and software | Maximum 3413 btu/hr (860 | ||
dependent) |
|
|
|
Power Supply Fan | 92x25 mm variable speed |
| |
Blue Angel Compliant | N/A |
| |
(<5w in S5 – power off) |
|
|
|
FEMP Standby Power | YES |
| |
compliant @ 115V |
|
|
|
(<2W in S5 – power off) |
|
|
|
Power Consumption in ES | < 7 W |
| |
mMode – Suspend to RAM |
|
|
|
(S3) (instantly available PC) |
|
|
|
DA - 12505 Canada — Version 26 — January 7, 2008 | Page 25 |