HP XW6400X manual RoHS Compliance

QuickSpecs

HP xw6400 Workstation

Technical Specifications - Monitors

Waste Electrical and Electronic Equipment (WEEE)

Directive, 2002/96/EC.

This product is in compliance with California

Proposition 65 (State of California; Safe Drinking

Water and Toxic Enforcement Act of 1986).

This product is in compliance with the IEEE 1680 (EPEAT) standard at the SILVER level, see www.epeat.net.

Plastics parts weighing over 25 grams used in the product are marked per ISO 11469 and ISO1043.

Display meets the requirement for low frequency electromagnetic fields per MPR-II, TCO, and prEN50279 A/B/C.

	This product contains 0% recycled materials (by wt.)
	This product is 97.6% recycleable when properly
	disposed of at end of life.
	Packaging Materials
	Corrugated Paper 2.19 kg
	PE-LD Bags 0.09 kg
	EPS Molded Foam 1.07 kg
RoHS Compliance	Hewlett-Packard is committed to compliance with
	all applicable environmental laws and regulations,
	including the European Union Restriction of
	Hazardous Substances (RoHS) Directive. HP's goal
	is to exceed compliance obligations by meeting the
	requirements of the RoHS Directive on a worldwide
	basis. By July 1, 2006, RoHS substances will be
	virtually eliminated (virtually = to levels below legal
	limits) for all HP electronic products subject to the
	RoHS Directive, except where it is widely recognized
	that there is no technically feasible alternative (as
	indicated by an exemption under the EU RoHS
	Directive).
Material Usage	This product does not contain any of the following
	substances in excess of regulatory limits (refer to the
	HP General Specification for the
	Environment at
	http://www.hp.com/hpinfo/globalcitizenship
	/environment/supplychain/gen_specifications.html):
	Asbestos
	Certain Azo Colorants
	Certain Brominated Flame Retardants - may
	not be used as flame retardants in plastics
	Cadmium

DA - 12505 Canada — Version 26 — January 7, 2008 Page 84