Configuring access to HP P6000 Command View filter list

5.Open a text file and paste the data.

Example

Selecting text on the View Message Logs page.

Configuring access to HP P6000 Command View (filter list)

You can control which servers are allowed to access the array-based instance of HP P6000 Command View on this storage system. This is done by creating and enabling a filter list of allowed HP P6000 Command View client IP addresses.

Considerations

•You must be logged in as an administrator.

•The HP P6000 Command View client filter list can be enabled and disabled from the Control Panel.

•Proxy server configuration. If the client computer is using a proxy server to access array-based HP P6000 Command View, the proxy server settings in the Control Panel must be configured correctly. Otherwise, the detected client IP address may not match the IP address in the list.

•DNS resolution. If the DNS server settings are not configured correctly in the HP P6000 Control Panel, a host name that is added to the client filter list may not be resolved to the correct IP address.

•If access to the HP P6000 Control Panel is not possible, the HP P6000 Command View client filter list can be disabled by using the reset button on the HP P6000 management module. See HP P6000 management module.

•Restrictions apply. See Management module IP addresses.

To view or change the access list:

1.Select Administrator Options > Configure Network Options. The Detailed Network Options page appears.

2.Click Configure client filter.

3.Follow the instructions on the page.

Confirming system alerts

In rare cases when a storage system is not in a normal state and requires intervention, an alert message can appear in the Control Panel. Review the message and select an action.

Configuring access to HP P6000 Command View (filter list)